Entry type: FAQ Entry ID: 109744337, Entry date: 02/24/2017
How to you connect the communication module CM 1542-5 or the communications processor CP 1542-5 as I slave in STEP 7 V5.x to an S7-300/S7-400 CPU?
With the communication module CM 1542-5 and the communications processor CP 1542-5 you can operate an S7-1500 as I slave on a PROFIBUS DP master system.
The following instructions show you how to connect the CM 1542-5 as I slave in STEP 7 V5.x to an S7-300/S7-400 CPU.
You use the same procedure as for the CM 1542-5 to connect the CP 1542-5 as I slave in STEP 7 V5.x to an S7-300/S7-400 CPU.
In order to protect technical infrastructures, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art IT security concept. Siemens’ products and solutions constitute one element of such a concept. For more information about cyber security, please visithttps://www.siemens.com/cybersecurity#Ouraspiration.
Personalization saves you typing! If you have already been registered, you can login directly. If you are not registered yet, you can inform and register yourself without obligation here (our service is free of charge).
Number of characters: 0 (max. 500)
Send copy of comment to sender. (login required)
*) Important: Please use this form for general feedback only. All technical and specialist topics should be directed to the expert community in the Technical Forum.
Support to the statistics
With this function the IDs found are listed according to number (format .txt).
Topic pages for this entry