×
Siemens Industry Online Support
Siemens AG
Entry type: Download Entry ID: 109749443, Entry date: 04/08/2019
(0)
Rate

Updates for SIRIUS SOFT STARTER ES V14 SP1

  • Entry
  • Associated product(s)
Available downloads: Overview of the current and earlier versions

Current version

Status April 2019: Update 5

This update is valid for the following product:

  • SIRIUS SOFT STARTER ES V14 SP1

In conjunction with PROFINET devices Note the following:

Devices connected to an enterprise network or directly to the internet must be appropriately protected against unauthorized access, e.g. by use of firewalls and network segmentation. For more information about industrial security, please visit  http://www.siemens.com/industrialsecurity 

Bug-fixing:

  • Correction of problems with online access via the Sirius PtP interface.
  • Fixed issues, when opening trace measurements in a different UI language than they were recorded
  • Stability when working with the TIA Portal has been improved based on the customer feedback.

Installation instructions:

  • Please make sure that further TIA Portal V14 SP1-based software products have at least the version V14 SP1 Update 7 (109747387). Otherwise, installation of SIRIUS SOFT STARTER ES V14 SP1 Update 5 is not possible. 
  • Updates are cumulative and contain all previous updates.
  • The update can only be installed if SIRIUS SOFT STARTER ES V14 SP1 is already installed 109745870 
  • After each installation of SIRIUS SOFT STARTER ES V14 SP1, the latest update should be installed.

Third-party software - Licensing terms and copyright information

You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the Readme_OSS_All_Languages_Upd5 file.

Special information for resellers

The information and the license terms in the Readme_OSS_All_Languages_Upd5 file must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.

 Registrierung notwendig  Readme_OSS_All_Languages_Upd5.htm (1,3 MB)

Download

 Download unterliegt Exportcontrolle  SOFTSTARTER_ES_V14_SP1_Upd5.exe (305,4 MB) *
SHA-256 checksum:  Registrierung notwendig  Code_SOFTSTARTER_ES_V14_SP1_Upd5.txt (1 KB)
Information about SHA-256: 109483101
* Important note: The software is subject to export restrictions, download for registered users only.


Status July 2018: Update 4

This update is valid for the following product:

  • SIRIUS SOFT STARTER ES V14 SP1

In conjunction with PROFINET devices Note the following:

Devices connected to an enterprise network or directly to the internet must be appropriately protected against unauthorized access, e.g. by use of firewalls and network segmentation. For more information about industrial security, please visit  http://www.siemens.com/industrialsecurity


Bug-fixing:

  • Fixed issues when using Port Configuration Tool "S7-PCT" for IO-Link when a soft starter 3RW44 unit was connected to PLC at the same time.
  • Stability when working with the TIA Portal has been improved, partly based on the feedback from returned crash reports.

Installation instructions:

  • Updates are cumulative and contain all previous updates.
  • The update can only be installed if SIRIUS SOFT STARTER ES V14 SP1 is already installed 109745870
  • After each installation of SIRIUS SOFT STARTER ES V14 SP1, the latest update needs to be installed.

Third-party software - Licensing terms and copyright information

You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the ReadMe_OSS file.

Special information for resellers

The information and the license terms in the ReadMe_OSS file must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.

 Registrierung notwendig  Readme_OSS (1,3 MB)

Download

 Registrierung notwendig  SOFTSTARTER_ES_V14_SP1_Upd4.exe (305,0 MB) 
SHA-256 checksum:  Registrierung notwendig  Code_SOFTSTARTER_ES_V14_SP1_Upd4.txt (1 KB)
Information about SHA-256: 109483101


Status December 2017: Update 2

This update is valid for the following product:

  • SIRIUS SOFT STARTER ES V14 SP1

In conjunction with PROFINET devices Note the following:

Devices connected to an enterprise network or directly to the internet must be appropriately protected against unauthorized access, e.g. by use of firewalls and network segmentation. For more information about industrial security, please visit  http://www.siemens.com/industrialsecurity 

Bug-fixing:

  • In the parameter comparer all current limit values are displayed correctly.
  • Now it is possible to download a soft starter with configured PROFINET module via local interface.
  • If you transfer the parameters to the device, go offline and change the PROFIBUS address the new address was not taken over during download. This is fixed.
  • In the log book all messages and time stamps fit together now.
  • If you activate the field bus of a starter with PROFINET module in the HMI it was not possible to download the project. This is possible now.
  • Several improvements in trace functionality 

Installation instructions:

  • Updates are cumulative and contain all previous updates.
  • The update can only be installed if SIRIUS SOFT STARTER ES V14 SP1 is already installed 109745870 
  • After each installation of SIRIUS SOFT STARTER ES V14 SP1, the latest update needs to be installed.

Third-party software - Licensing terms and copyright information

You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the ReadMe_OSS file.

Special information for resellers

The information and the license terms in the ReadMe_OSS file must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.

 Registrierung notwendig  Readme_OSS (1,3 MB) 

Download

 Registrierung notwendig  SOFTSTARTER_ES_V14_SP1_Upd2.exe (295,5 MB)
SHA-256 checksum:  Registrierung notwendig  Code_SOFTSTARTER_ES_V14_SP1_Upd2.txt (1 KB)
Information about SHA-256: 109483101 


Status August 2017: Update 1

This update is valid for the following product:

  • SIRIUS SOFT STARTER ES V14 SP1

In conjunction with PROFINET devices Note the following:

Devices connected to an enterprise network or directly to the internet must be appropriately protected against unauthorized access, e.g. by use of firewalls and network segmentation. For more information about industrial security, please visit  http://www.siemens.com/industrialsecurity

Bug-fixing:

  • The transfer buttons in the parameter editor are active or inactive dependent on the difference between the project and the data on the device and the current values in the editor
  • The handling and the display of the webserver password have been improved.
  • The parameter compare in the commissioning editor is updated after each parameter change.
  • Several improvements in trace functionality

Installation instructions:

  • Updates are cumulative and contain all previous updates.
  • The update can only be installed if SIRIUS SOFT STARTER ES V14 SP1 is already installed 109745870
  • After each installation of SIRIUS SOFT STARTER ES V14 SP1, the latest update needs to be installed.

Third-party software - Licensing terms and copyright information

You can find the copyright information for third-party software contained in this product, particularly open source software, as well as applicable licensing terms of such third-party software in the ReadMe_OSS file.

Special information for resellers

The information and the license terms in the ReadMe_OSS file must be passed on to the purchasing party to avoid license infringements by the reseller or purchasing party.

 Registrierung notwendig  Readme_OSS (1,3 MB)

Download

 Registrierung notwendig  SOFTSTARTER_ES_V14_SP1_Upd1.exe (249,8 MB)
SHA-256 checksum:  Registrierung notwendig  Code_SOFTSTARTER_ES_V14_SP1_Upd1.txt (1 KB)
Information about SHA-256: 109483101

Security information
In order to protect technical infrastructures, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art IT security concept. Siemens’ products and solutions constitute one element of such a concept. For more information about cyber security, please visit
https://www.siemens.com/cybersecurity#Ouraspiration.