Siemens Industry Online Support
Siemens AG
Entry type: FAQ Entry ID: 13283804, Entry date: 11/04/2002

Linking ProTool/Pro Runtime V6.0 with PLCSIM V5.0 SP1

  • Entry
  • Associated product(s)

Which settings have to be made to be able to link the ProTool/Pro Runtime V6.0 with the PLCSIM V5.0 SP1 when there is no MPI card installed in the PG/PC being used?

If there is no MPI card installed in the configuration computer, then at least the PC adapter must be installed as interface for STEP 7 V5.1 SP4. 

Please proceed as follows:

  1. Select Start >SIMATIC > STEP 7 > Set PG/PC interface.
  2. Click the "Select" button in "Interfaces Add/Remove".
  3. Select "PC-Adapter" in the left window.
  4. Click the "Install" button.

Fig. 1: Installing the interface

  1. Close the dialog.
  2. For "Access Point of the Application" set "S7ONLINE > PC Adapter".

Fig. 2: Setting up the access point

Communication between ProTool/Pro Runtime V6.0 and PLCSIM V5.0 SP1 is enabled in this way.

Security information
In order to protect technical infrastructures, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art IT security concept. Siemens’ products and solutions constitute one element of such a concept. For more information about cyber security, please visit
Rate entry
no rating
Requests and feedback
What do you want to do?
Note: The feedback always relates to the current entry / product. Your message will be forwarded to our technical editors working in the Online Support. In a few days, you will receive a response if your feedback requires one. If we have no further questions, you will not hear from us.