Connecting to the Network via Auxiliary System
What can I do if I am not able to connect to the telephone network via an auxiliary system with TeleService?
If you wish to dial into the telephone network via an auxiliary station with TeleService, you will possibly get a busy dial tone. Thus, the Modem does not dial out of the auxiliary system.
Please verify whether the modem parameter ATX3 is set. ATX3 should be used on telephone - auxiliaries systems in order to avoid the waiting time for the dial tone.
The parameter dialog for the parameter ATX3 can be found
via the Windows-System configuration (Fig 1):
Telephone and Modem options > Modems: Properties > Tab: Advanced
Fig. 1: Configuration of the parameters "ATX3"
In auxiliary systems, do not set the option "Wait for
dial tone before dialling". Please check the setting
Telephone and Modem options > Modems: Properties > Tab: Modem
Fig. 2: The option "Wait for dial tone before dialling" must not be set
In the dialling rules the valid numbers to access an outside
line for local- and long distance calls have to be entered (Fig.
Telephone and Modem options > Dialling rules: Edit Location > General: Dialling rules
Fig. 3: Access an outside line for local- and long distance calls