Technology CPUs: Feeder for a press based on static cam disks
The technological task is based on a press with connected feeder for stock feed. The rotary axis of the press is used as master axis for control of the stock feed via a static cam disk. The cam disk is developed and created in such a way that an exactly defined sequence between the continuously moving master axis of the press and the slave axis of the stock feed develops. In addition, a control signal for the gripper of the feeder is generated via an electronic cam switch on the master axis of the press.
The main task of this application for a Technology CPU is the development of a suitable cam disk for the synchronization of the feeder to the continuously moving rotary axis of the press. In this process a simple cam disk develops which is accompanied by further optimized versions.
|04/2006||V2.0 - updated with SIMATIC Technology 2.0, WinCC flexible 2005 and SINAMICS S120|
|11/2007||V3.0 - updated with SIMATIC Technology 3.0 SP2 and WinCC flex 2005 SP1 HF7|
stock feed interpolation, VDI wizard, polynomial definition, line shaft, master slave axis