×
Siemens Industry Online Support
Siemens AG
Entry type: Product note Entry ID: 21960532, Entry date: 08/25/2005
(0)
Rate

Premium Studio 2005 – Sales and Delivery Release

  • Entry
  • Associated product(s)

Premium Studio 2005 provides the most important software packages for engineering and runtime for SIMATIC S7/C7, SIMATIC HMI, SIMATIC NET and SINUMERIK, on one data carrier (DVD). General settings, such as the required software packages, languages to be installed, installation path, etc., can be selected via a specific Premium Studio 2005 SETUP before installation. The installation is automatic (silent), i.e. no further activities by the user are necessary. The use of Premium Studio thus results in a significant time and cost saving for installation and maintenance of the software packages. No licenses are included with Premium Studio. Licenses must be obtained separately, either by using existing licenses of the version in question or by purchasing new licenses. The delivery release of Premium Studio 2005 is planned for mid. August 2005. 



Contents:

  1. Ordering data for Premium Studio 2005
  2. User benefits
  3. Installation requirements
  4. Licensing 
  5. Scope of delivery

1. Ordering data

 

Order No.

Designation

6ES7815-8CD01-0YA7

Premium Studio 2005, software on DVD with Trial License.

6ES7815-8CD00-0YL7

Premium Studio Software Update Service (SUS). The scope of delivery only includes the data carrier (DVD) with Trial License.

 

2. User benefits of Premium Studio 2005

The main benefit in the use of Premium Studio is the significant reduction in time and expenses for installation and maintenance of the A&D software products. This will improve productivity and reduce the overall costs (Total cost of ownership). The benefit to the user is all the more, the more A&D software products are being used.


2.1 Fully automatic installation by the Premium Studio Setup

  • One-time selection of the settings required for all software packages, e.g. installation path
  • No further user activities required during installation 
  • Automatic updating (after confirmation) of all relevant products 

2.2 Installation of the selected software in the correct sequence

  • The Premium Studio Setup ensures that any existing installation sequence is being adhered to.

2.3 Reduction of administration and handling (Zero Admin) 

  • Once the software products to be installed have been selected, the installation is performed without any further activities by the user.
  • The selection of the software products to be installed can be recorded by means of a RECORD function. The Premium Studio Setup and the recorded file can then be used to perform identical installations on any number of further computers, with a minimum of effort. 
  • The installation can be made from a central or networking computer. The Premium Studio DVD must either be copied to this central computer or kept in its DVD drive. 

2.4 Compatibility and interoperability

An extended testing scenario ensures the compatibility and interoperability of the products contained in Premium Studio. 

3. Installation requirements

3.1 Hardware requirements 

Premium Studio 2005 includes software packages for different target systems. A difference is made between PGs/PCs (Programming devices / PCs) and the PCU50 target system (of the SINUMERIK HMI runtime software). To be able work with the software on this DVD, you require one of the following two hardware platforms and a DVD drive:

  • A programming device or a PC with Pentium III microprocessor or better and at least 256 MB RAM. We recommend a Pentium IV microprocessor with min. 512 MB RAM. The required space on the hard disk is approx. 7 GB for a complete installation of all the included software packages.
     
  • PCU50 with 566 MHz microprocessor and min. 256 MB RAM. We recommend a microprocessor with 1.2 GHz and 256 MB RAM. The required space on the hard disk depends on the scope of the installation and is up to 3 GB for the installed software. 

The Premium Studio Setup automatically identifies the target system and offers only the relevant products for installation. The correlation between software and hardware can be seen in the following table.

 

Product

PG/PC

PCU50

SIMATIC STEP 7

X

---

SIMATIC S7-GRAPH

X

X

SIMATIC S7-PDIAG

X

X

SIMATIC S7-HIGRAPH

X

X

SIMATIC S7-SCL

X

X

SIMATIC S7-PLCSIM

X

X

SIMATIC S7 Distributed Safety Programming

X

---

SIMATIC S7 Distributed Safety Config. Pack

X

X

SIMATIC D7-SYS

X

---

SIMATIC CFC

X

X

SINUMERIK Toolbox 810D/840D Add-on for STEP 7

X

---

SIMATIC iMap

X

---

SIMATIC WinCC

X

---

SIMATIC WinCC ProAgent

X

---

SIMATIC WinCC Web-Navigator

X

---

SIMATIC WinCC Flexible 2005 Advanced

X

---

SIMATIC WinCC Flexible 2005 ProAgent

X

---

SIMATIC NET PC Software

X

X

A&D Data Management Agent

---

X

A&D Data Management Client

X

X

Drive ES Basic

X

X

HMI Advanced

---

X

SIMATIC STEP 7 for SINUMERIK Hardware

---

X

TRANSLINE 2000 HMI Pro CS

X

X

TRANSLINE 2000 HMI Pro RT

---

X

Automation License Manager

X

X

 

3.2 Software requirements 

  • Microsoft Windows XP Professional Service Pack 1
  • WinCC requires the WinCC embedded SQL server for operation (supplied together with Premium Studio).

4. Licensing 

Premium Studio does not contain any licenses for the included software products. The required licenses must be purchased through the usual sales channels before productive use of the software products.
 

5. Scope of delivery 

The scope of delivery of Premium Studio includes a DVD and a separate CD (WinCC embedded SQL-Server). The DVD includes the following individual products for which the licenses must be purchased separately as standard product:

Product

Version

Order No.

S7 Programming and configuration

Standard Tools

SIMATIC STEP 7 (Floating License)

V 5.3

6ES7810-4CC07-0YA5

Engineering Tools

SIMATIC S7-GRAPH (Floating License)

V5.3

6ES7811-0CC06-0YA5

SIMATIC S7-PDIAG (Single License)

V5.1

6ES7840-0CC03-0YE0

SIMATIC S7-HIGRAPH (Single License)

V5.3

6ES7811-3CC0 5-0YE0

SIMATIC S7-SCL (Floating License)

V5.3SP1

6ES7811-1CC05-0YA5

SIMATIC S7-PLCSIM (Floating License)

V5.3  SP1

6ES7841-0CC04-0YA5

SIMATIC S7 Distributed Safety (Single License)

V5.3

6ES7833-1FC01-0YX0

SIMATIC D7 SYS

V6.2

6ES7852-0CC00-0YA5

SIMATIC CFC

V6.1

6ES7658-1EX16-2YA5

 

Component Based Automation

SIMATIC iMap

V2.0 SP1

6ES7820–0CC03–0 YX0

 

SIMATIC NET Communication Software

SIMATIC NET PC Products

2005

 

Industrial Ethernet
SOFTNET-S7 Lean V6.3
+ Advanced PC Configuration

 

6GK1704-1LW63-3AA0

Industrial Ethernet
SOFTNET-S7 V6.3
+ Advanced PC Configuration

 

6GK1704-1CW63-3AA0

Industrial Ethernet
SOFTNET-PG V6.3
+ Advanced PC Configuration

 

6GK1704-1PW63-3AA0

PROFIBUS
SOFTNET-S7 V6.3
+ Advanced PC Configuration

 

6GK1704-5CW63-3AA0

PROFIBUS
SOFTNET-DP V6.3
+ Advanced PC Configuration

 

6GK1704-5DW63-3AA0

Industrial Ethernet
SNMP OPC-Server Basic V6.3                                     
+ Advanced PC Configuration

 

6GK1706-1NW63-3AA0

Industrial Ethernet
SNMP OPC-Server Extended V6.3
+ Advanced PC Configuration

 

6GK1706-1NX63-3AA0

Industrial Ethernet
SNMP OPC-Serve Power Pack (Upgrade Basic-Extended V6.3

 

6GK1706-1NW63-3AA4

PROFIBUS
S7-5613 V6.3
+ Advanced PC Configuration

 

6GK1713-5CB63-3AA0

PROFIBUS
DP-5613 V6.3
+ Advanced PC Configuration

 

6GK1713-5DB63-3AA0

PROFIBUS
FMS-5613 V6.3
+ Advanced PC Configuration

 

6GK1713-5FB63-3AA0

Industrial Ethernet
S7-REDCONNECT V6.3
+ Advanced PC Configuration

 

6GK1716-0HB63-3AA0

Industrial Ethernet
Upgrade S7-REDCONNECT V6.3
+ Advanced PC Configuration

 

6GK1716-0HB63-3AA4

Industrial Ethernet
S7-1613 V6.3
+ Advanced PC Configuration

 

6GK1716-1CB63-3AA0

Industrial Ethernet
PG-1613 V6.3
+ Advanced PC Configuration

 

6GK1716-1PB63-3AA0

Industrial Ethernet
TF-1613 V6.3
+ Advanced PC Configuration

 

6GK1716-1TB63-3AA0

 

SIMATIC HMI Software

SIMATIC WinCC

V6.0 SP3

 

128 PowerTags (RT 128) incl. 512 archive variables

 

6AV6 381-1BC06-0DX0

256 PowerTags (RT 256) incl. 512 archive variables

 

6AV6 381-1BD06-0DX0

1024 PowerTags (RT 1024) incl. 512 archive variables

 

6AV6 381-1BE06-0DX0

8K PowerTags (RT 8192) incl. 512 archive variables

 

6AV6 381-1BH06-0DX0

64K PowerTags (RT Max) inkl. 512 archive variables

 

6AV6 381-1BF06-0DX0

128 PowerTags (RC 128) inkl. 512 archive variables

 

6AV6 381-1BM06-0DX0

256 PowerTags (RC 256) inkl. 512 archive variables

 

6AV6 381-1BN06-0DX0

1024 PowerTags (RC 1024) inkl. 512 archive variables

 

6AV6 381-1BP06-0DX0

8K PowerTags (RC 8192) inkl. 512 archive variables

 

6AV6 381-1BS06-0DX0

64K PowerTags (RC Max) inkl. 512 archive variables

 

6AV6 381-1BQ06-0DX0

512 to 1500 archive variables

 

6AV6371-1DQ06-0AX3

512 to 5000 archive variables

 

6AV6371-1DQ06-0BX3

512 to 30000 archive variables

 

6AV6371-1DQ06-0EX3

512 to 80000 archive variables

 

6AV6371-1DQ06-0GX3

1500 to 5000 archive variables

 

6AV6371-1DQ06-0AB3

1500 to 30000 archive variables

 

6AV6371-1DQ06-0AE3

1500 to 80000 archive variables

 

6AV6371-1DQ06-0AG3

5000 to 30000 archive variables

 

6AV6371-1DQ06-0BE3

5000 to 80000 archive variables

 

6AV6371-1DQ06-0BG3

30000 to 80000 archive variables

 

6AV6371-1DQ06-0EG3

to upgrade the RT version from V5.x to V6.0SP3

 

6AV6381-1AA06-0DX4

to upgrade the RC version from V5.x to V6.0SP3

 

6AV6381-1AB06-0DX4

WinCC/Server

 

6AV6371-1CA06-0DX0

Redundancy

 

6AV6371-1CF06-0DX0

User Archives

 

6AV6371-1CB06-0DX0

SIMATIC WinCC/ProAgent

V6.0 SP2

6AV6371-1DG06-0CX0

SIMATIC WinCC/Web Navigator incl. 3 Client licenses

V6.1

6AV6371-1DH06-1AX0

SIMATIC WinCC/Web Navigator incl. 10 Client licenses

V6.1

6AV6371-1DH06-1BX0

SIMATIC WinCC/Web Navigator incl. 25 Client licenses

V6.1

6AV6371-1DH06-1CX0

 

SIMATIC WinCC flexible 2005 Compact

2005

6AV6611-0AA01-1CA5

SIMATIC WinCC flexible 2005 Standard

2005

6AV6612-0AA01-1CA5

SIMATIC WinCC flexible 2005 Advanced

2005

6AV6613-0AA01-1CA5

SIMATIC WinCC flexible /ChangeControl  for WinCC flexible  Advanced

2005

6AV6613-6AA01-1AB5

SIMATIC WinCC flexible /Sm@rtAccess for SIMATIC Panel

2005

6AV6618-7AB01-1AB0

SIMATIC WinCC flexible /Sm@rtAccess for WinCC flexible Runtime

2005

6AV6618-7AD01-1AB0

SIMATIC WinCC flexible /Sm@rtService for SIMATIC Panel

2005

6AV6618-7BB01-1AB0

SIMATIC WinCC flexible /Sm@rtService for WinCC flexible Runtime

2005

6AV6618-7BD01-1AB0

SIMATIC WinCC flexible /OPC Server for SIMATIC Multi Panel

2005

6AV6618-7CC01-1AB0

SIMATIC WinCC flexible /OPC Server for WinCC flexible Runtime

2005

6AV6618-7CD01-1AB0

SIMATIC WinCC flexible /Archives for WinCC flexible Runtime

2005

6AV6618-7ED01-1AB0

SIMATIC WinCC flexible /Recipes for WinCC flexible Runtime

2005

6AV6618-7FD01-1AB0

SIMATIC WinCC flexible /Archives+Recipes for WinCC flexible Runtime

2005

6AV6618-7GD01-1AB0

SIMATIC WinCC flexible 2004 Runtime, 128 Power Tags

2005

6AV6613-1BA01-1CA0

SIMATIC WinCC flexible 2004 Runtime, 512 Power Tags

2005

6AV6613-1DA01-1CA0

SIMATIC WinCC flexible 2004 Runtime, 2048 Power Tags

2005

6AV6613-1FA01-1CA0

SIMATIC WinCC flexible 2005/ProAgentfor SIMATIC Panel

2005

6AV6618-7DB01-1AB0

SIMATIC WinCC flexible 2005/ProAgentfor WinCC flexible Runtime

2005

6AV6618-7DD01-1AB0

SIMATIC WinCC flexible /Audit for SIMATIC Panel

2005

6AV6618-7HB01-1AB0

SIMATIC WinCC flexible /Audit for WinCC flexible Runtime

2005

6AV6618-7HD01-1AB0

 

SINUMERIK Software

 

 

SIMATIC STEP7  for SINUMERIK hardware

V5.3

6FC5252-5AY01-3AG0

SINUMERIK Toolbox 810D/840D Add-on for STEP7

V5.2 SP1

no separate MLFB

TRANSLINE 2000 HMI Pro

V6.3

6FC5263-0PY50-0AG0

HMI Advanced

V6.4.18

6FC5253-0BX10-0AG0

 

Drive ES

 

 

Drive ES Basic

V5.3 SP2

6SW1700-5JA00-3AA0

 

A&D Data management

 

 

A&D DataManagement Agent

V1.1

6BQ3030-3AA00-0AA0

A&D DataManagement Client

V5.2

6BQ3030-1AA10-0AB0

 


Security information
In order to protect technical infrastructures, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art IT security concept. Siemens’ products and solutions constitute one element of such a concept. For more information about cyber security, please visit
https://www.siemens.com/cybersecurity#Ouraspiration.