×
Siemens Industry Online Support
Siemens AG
Entry type: Product note, Entry ID: 25439561, Entry date: 05/29/2007
(0)
Rate

Premium Studio 2007 – Sales and Delivery Release

  • Entry
  • Associated product(s)

Premium Studio 2007 provides you with the most important software packages for engineering and runtime for SIMATIC S7/C7, SIMATIC HMI, SIMATIC NET, SINUMERIK und SIMOTION on two data carriers (DVDs). The user can select general settings (e.g. languages for installation, installation path, etc.) and the required software packages via a specially developedSETUP. The installation is then performed automatically (silent), i.e. no further activities by the user are necessary. The use of Premium Studio thus results in a significant time and cost saving for installation and maintenance of the software packages. No licenses are included with Premium Studio. For productive operation the user must either use existing licenses of the version in question or he must purchase new licenses. Premium Studio 2007 is now available for delivery. 


Contents:

  1. Ordering data for Premium Studio 2007
  2. User benefits
  3. Installation requirements
  4. Licensing  
  5. Scope of delivery

 

1. Ordering data   

Designation

Order No.

Premium Studio 2007, on DVD with Trial License for many of the included software products.

6ES7815-8CD04-0YA7

Premium Studio Software Update Service (SUS). The scope of delivery only includes the data carrier (DVD) with Trial License.

6ES7815-8CD00-0YL7

 

2. User benefits of Premium Studio

The main benefit in the use of Premium Studio is the significant reduction in time and expenses for installation and maintenance of the A&D software products. This will improve productivity and reduce the overall costs (Total cost of ownership). The benefit to the user increases all the more, the more A&D software products are being used.


2.1 Fully automatic installation by the Premium Studio Setup

  • One-time selection of the settings required for all software packages, e.g. installation path
  • No further user activities are needed during installation
  • Automatic updating (after confirmation) of all relevant products 

2.2 Installation of the selected software in the correct sequence

·"font:7.0pt "Times New Roman"">        The Premium Studio Setup ensures that any existing installation sequence is being adhered to.

2.3 Reduction of administration and handling (Zero Admin) 

  • Once the software products to be installed have been selected, the installation is performed without any further activities by the user.
  • The selection of the software products to be installed can be recorded by means of a RECORD function. The Premium Studio Setup and the recorded file can then be used to perform identical installations on any number of further computers, with a minimum of effort.
  • The installation can be made from a central or networking computer. The Premium Studio DVD must either be copied to this central computer or kept in its DVD drive. Installation can then be performed over the network without any problems.

2.4 Compatibility and interoperability

An extended testing scenario ensures compatibility and interoperability of the products contained in Premium Studio. 

3. Installation requirements 

3.1 Hardware requirements 

Premium Studio includes software packages for different target systems. A difference is made between PGs/PCs (Programming devices / PCs) and the PCU50 target system (of the SINUMERIK HMI runtime software). To be able work with the software on these DVDs, you require one of the following two hardware platforms and a DVD drive:

  • A programming device or a PC with Pentium III microprocessor or better and at least 256 MB RAM. We recommend a Pentium IV microprocessor with min. 512 MB RAM. The required space on the hard disk is approx. 15 GB for a complete installation of all the included software packages.
     
  • PCU50 with 566 MHz microprocessor and min. 256 MB RAM. We recommend a microprocessor with 1.2 GHz and 256 MB RAM. The required space on the hard disk depends on the scope of the installation and is up to 3 GB for the installed software. 

The Premium Studio Setup automatically identifies the target system and offers only the relevant products for installation.
 

3.2 Operating system / software preconditions

  • Microsoft Windows XP Professional Service Pack 1 or Service Pack 2
  • WinCC requires the WinCC embedded SQL server for operation (supplied together with Premium Studio).

3.3 Notes on the "Readme file" 

The Readme file on the DVD provides more information on the product. You can read it here ( 196 KB ) as pdf (182 KB).
 

4. Licensing 
Premium Studio does not provide the user with licenses for the included software products. The required licenses for productive use must be purchased through the usual sales channels. However, trial licenses are included for many of the products on the DVDs, with which the software can be tested.
 

5. Scope of delivery 
The scope of delivery of Premium Studio includes three DVDs (double-layer). These DVDs include the individual products listed below. Licenses must be purchased separately as standard products.
Only the versions with their standard licences are listed (Floating or Single License), the upgrade versions of the listed software products can be found on the
Siemens Internet Sites or in the A&D Mall:

 

Product

Version

Order No

SIMATIC STEP 7 (Floating License)

V5.4

6ES7810-4CC08-0YA5

 

 

 

Engineering Tools

 

 

SIMATIC S7-PDIAG (Single License)

V5.3

6ES7840-0CC04-0YA5

SIMATIC S7-HIGRAPH (Single License)

V5.3

6ES7811-3CC05-0YA5

SIMATIC S7-SCL (Floating License)

V5.3

6ES7811-1CC05-0YA5

SIMATIC S7-PLCSIM (Floating License)

V5.3

6ES7841-0CC04-0YA5

SIMATIC S7 Distributed Safety (Single License)

V5.4

6ES7833-1FC02-0YA5

SIMATIC D7 SYS

V6.2

6ES7852-0CC00-0YA5

SIMATIC CFC

V6.1

6ES7658-1EX16-2YA5

SIMATIC CFC

V7.0

6ES7658-1EX07-2YA5

SIMATIC Version Trail

V6.1

6ES7658-1FX16-2YB5

SIMATIC Version Trail

V7.0

6ES7658-1FX07-2YA5

SIMATIC Version Cross Checker

V6.1

6ES7658-1CX16-2YB5

SIMATIC Version Cross Manager

V7.0

6ES7658-1CX07-2YA5

SIMATIC Logon

V1.3

6ES7 658-7BX31-2YA0

SIMATIC PDM

V6.0

6ES7658-3KX06-0YA5

SIMATIC RFID Systems (RF170C)

V1.2

6GT2080-2AA10

 

 

 

Drives

 

 

Drive ES Basic

V5.4

6SW1700-5JA00-4AA0

S7-Technology (T-Config)

V3.0

6ES7864-1CC30-0YX0

SIMOTION Scout

V4.0

6AU1810-0BA40-0XA0

 

 

 

Component-Based Automation

 

 

SIMATIC iMap

V3.0

6ES7820-0CC04-0YA5

 

 

 

SIMATIC NET Communication Software

 

 

SIMATIC NET PC Products

2006

---

  • Ind. Ethernet
    SOFTNET-S7 Lean V6.4
    + Advanced PC Configuration

 

6GK1704-1LW64-3AA0

  • Ind. Ethernet
    SOFTNET-S7 V6.4
    + Advanced PC Configuration

 

6GK1704-1CW64-3AA0

  • Ind. Ethernet
    SOFTNET-PG V6.4
    + Advanced PC Configuration

 

6GK1704-1PW64-3AA0

  • PROFIBUS
    SOFTNET-S7 V6.4
    + Advanced PC Configuration

 

6GK1704-5CW64-3AA0

  • PROFIBUS
    SOFTNET-DP V6.4
    + Advanced PC Configuration

 

6GK1704-5DW64-3AA0

  • Ind. Ethernet
    SNMP OPC Server Basic V6.4
    + Advanced PC Configuration

 

6GK1706-1NW64-3AA0

  • Ind. Ethernet
    SNMP OPC Server Extended V6.4
    + Advanced PC Configuration

 

6GK1706-1NX64-3AA0

  • PROFIBUS
    S7-5613 V6.4
    + Advanced PC Configuration

 

6GK1713-5CB64-3AA0

  • PROFIBUS
    DP-5613 V6.4
    + Advanced PC Configuration

 

6GK1713-5DB64-3AA0

  • PROFIBUS
    FMS-5613 V6.4
    + Advanced PC Configuration

 

6GK1713-5FB64-3AA0

  • Ind. Ethernet
    S7-REDCONNECT V6.4
    + Advanced PC Configuration

 

6GK1716-0HB64-3AA0

  • Ind. Ethernet
    Upgrade S7-REDCONNECT V6.4
    + Advanced PC Configuration

 

6GK1716-0HB64-3AA4

  • Ind. Ethernet
    S7-1613 V6.4
    + Advanced PC Configuration

 

6GK1716-1CB64-3AA0

  • Ind. Ethernet
    TF-1613 V6.4
    + Advanced PC Configuration

 

6GK1716-1TB64-3AA0

 

 

 

SIMATIC HMI Software

 

 

SIMATIC WinCC

V6.2

 

128 PowerTags (RT 128) incl. 512 archive variables

 

6AV6381-1BC06-2AX0

256 PowerTags (RT 256) incl. 512 archive variables

 

6AV6381-1BD06-2AX0

1024 PowerTags (RT 1024) incl. 512 archive variables

 

6AV6381-1BE06-2AX0

8192 PowerTags (RT 8192) incl. 512 archive variables

 

6AV6381-1BH06-2AX0

65536 PowerTags (RT 65536) incl. 512 archive variables

 

6AV6381-1BF06-2AX0

128 PowerTags (RC 128) incl. 512 archive variables

 

6AV6381-1BM06-2AX0

256 PowerTags (RC 256) incl. 512 archive variables

 

6AV6381-1BN06-2AX0

1 024 PowerTags (RC 1024) incl. 512 archive variables

 

6AV6381-1BP06-2AX0

8 192 PowerTags (RT 8192) incl. 512 archive variables

 

6AV6381-1BS06-2AX0

65 536 PowerTags (RC 65536)

 

6AV6381-1BQ06-2AX0

ARCHIVE 1500

1 500 archive variables

 

6AV6371-1DQ16-2AX0

ARCHIVE 5000

5 000 archive variables

 

6AV6371-1DQ16-2BX0

ARCHIVE 10000

10 000 archive variables

 

6AV6371-1DQ16-2CX0

ARCHIVE 30000

30 000 archive variables

 

6AV6371-1DQ16-2EX0

ARCHIVE 80000

80 000 archive variables

 

6AV6371-1DQ16-2GX0

ARCHIVE 120000

120 000 archive variables

 

6AV6371-1DQ16-2JX0

WinCC/Server

 

6AV6371-1CA06-2AX0

WinCC/Redundancy

 

6AV6371-1CF06-2AX0

WinCC/User Archives

 

6AV6371-1CB06-2AX0

SIMATIC WinCC/ProAgent

V6.0 SP4

6AV6371-1DG06-0EX0

SIMATIC WinCC/Web-Navigator incl. 3 Client Licences

V6.2

6AV6371-1DH06-2AX0

SIMATIC WinCC/Web-Navigator incl. 10 Client Licences

V6. 2

6AV6371-1DH06-2BX0

SIMATIC WinCC/Web-Navigator incl. 25 Client Licences

V6. 2

6AV6371-1DH06-2CX0

SIMATIC WinCC/Web-Navigator incl. 50 Client Licences

V6. 2

6AV6371-1DH06-2DX0

SIMATIC WinCC/Web-Navigator Diagnostic Client

V6. 2

6AV6371-1DH06-2EX0

SIMATIC WinCC/Web-Navigator Diagnostic Server

V6. 2

6AV6371-1DH06-2FX0

SIMATIC WinCC/Connectivity Pack

V6. 2

6AV6371-1DR06-2AX0

SIMATIC WinCC/DataMonitor incl. 3 Client Licences

V62

6AV6371-1DN06-2AX0

SIMATIC WinCC/DataMonitor incl. 10 Client Licences

V6. 2

6AV6371-1DN06-2BX0

SIMATIC WinCC/DataMonitor incl. 25 Client Licences

V6. 2

6AV6371-1DN06-2CX0

SIMATIC WinCC/DataMonitor incl. 50 Client Licences

V6. 2

6AV6371-1DN06-2DX0

SIMATIC WinCC flexible 2005 Compact

2005

6AV6611-0AA01-1CA5

SIMATIC WinCC flexible 2005 Standard

2005

6AV6612-0AA01-1CA5

SIMATIC WinCC flexible 2005 Advanced

2005

6AV6613-0AA01-1CA5

SIMATIC WinCC flexible /ChangeControl for WinCC flexible Compact/Standard/Advanced

2005

6AV6613-6AA01-1AB5

SIMATIC WinCC flexible /Sm@rtAccess for SIMATIC Panel

2005

6AV6618-7AB01-1AB0

SIMATIC WinCC flexible /Sm@rtAccess for WinCC flexible Runtime

2005

6AV6618-7AD01-1AB0

SIMATIC WinCC flexible /Sm@rtService for SIMATIC Panel

2005

6AV6618-7BB01-1AB0

SIMATIC WinCC flexible /Sm@rtService for WinCC flexible Runtime

2005

6AV6618-7BD01-1AB0

SIMATIC WinCC flexible /OPC-Server for SIMATIC Multi Panel

2005

6AV6618-7CC01-1AB0

SIMATIC WinCC flexible /OPC-Server for WinCC flexible Runtime

2005

6AV6618-7CD01-1AB0

A9XOP310

SIMATIC WinCC flexible /Archives for WinCC flexible Runtime

2005

6AV6618-7ED01-1AB0

SIMATIC WinCC flexible /Recipes for WinCC flexible Runtime

2005

6AV6618-7FD01-1AB0

SIMATIC WinCC flexible /Archives+Recipes for WinCC flexible Runtime

2005

6AV6618-7GD01-1AB0

SIMATIC WinCC flexible 2005 Runtime, 128 Power Tags

2005

6AV6613-1BA01-1CA0

SIMATIC WinCC flexible 2005 Runtime, 512 Power Tags

2005

6AV6613-1DA01-1CA0

SIMATIC WinCC flexible 2005 Runtime, 2 048 Power Tags

2005

6AV6613-1FA01-1CA0

SIMATIC WinCC flexible 2005 /ProAgent for SIMATIC Panel

2005

6AV6618-7DB01-1AB0

SIMATIC WinCC flexible 2005 /ProAgent for WinCC flexible Runtime

2005

6AV6618-7DD01-1AB0

SIMATIC WinCC flexible /Audit for SIMATIC Panel

2005

6AV6618-7HB01-1AB0

SIMATIC WinCC flexible /Audit for WinCC flexible Runtime

2005

6AV6618-7HD01-1AB0

 

 

 

SINUMERIK HMI Software

 

 

SIMATIC STEP7 f. SINUMERIK Hardware

V5.4

6FC5252-5AY01-4AG0

SINUMERIK Toolbox 810D/840D adon for STEP7

V5.3

no. separate order no.

TRANSLINE 2000 HMI Pro RT

V6.5

6FC5263-0PY50-0AG0

TRANSLINE 2000 HMI Pro CS

V6.5

6FC5263-0PY80-0AG0

HMI Advanced

V7.2

6FC5253-7BX10-2AG0

SINUMERIK for WinCC flexible

V1.1

6FC5253-1CX25-1AG0

SIMOTION Scout

V4.0

6AU1 810-0BA40-0XA0

 

 

 

A&D Data management

 

 

A&D DataManagement Agent

V1.2

6BQ3030-3AA00-0AA0

A&D DataManagement Client

V6.1

6BQ3030-1AA20-1AB0

 

Note:

  • The products STEP 7, S7-SCL, S7-GRAPH and S7-PLCSIM are also available as bundle in "STEP 7 Professional".

  • Products can be upgraded with the licenses provided for this purpose.

For more information please see the Siemens Internet Sites or the A&D Mall or you can speak to your SIMATIC Partner at your local Siemens office.

SIMATIC Partner on the Internet