RCoax Cable 5 GHz 6XV1875-2D with a Missprint
Due to a production problem, the printing on the RCoax cable 5GHz (order no.: 6XV1875-2D) with Datecode (03/08) is not directly on the slits of the outer conductor, but somewhat above.
Except for the printing, the technical specifications of the cable are unchanged.
Due to this specification change, automatic deliveries of the cable have been stopped with immediate effect.
Shipments of the 5 GHz RCoax cable will only made with a special delivery release order.
PLEASE NOTE the following changes to the mounting instructions (Chapter 3 of the RCoax System User Manual)
The following applies to the 5GHz RCoax cable until further notice:
Alignment of the cable
Optimum radiation will be achieved when the slits, which are recognizable by the indentations in the outer sheath, point in the direction of the receiving antenna.
(The labelling of the cable is not necessarily in the vicinity of the slits!)
Please get in touch with your SIMATIC contact at your local Siemens Office if you have any further questions.
- You have a technical question / problem: Ask the Technical Support
- You want to discuss in our forum and exchange experiences with other users
- You want to create CAx data for one or more products
- You would like to send us feedback on this Entry