Siemens Industry Online Support
Siemens AG
Entry type: FAQ, Entry ID: 39298969, Entry date: 08/30/2012

In STEP 7, why can the "Find/Replace" dialog not be displayed in the LAD/STL/FBD editor?

  • Entry
  • Associated product(s)

When you select the "Find/Replace" function in STEP 7, the dialog cannot be displayed in the LAD/STL/FBD editor. If you have addressed a second monitor with you PC and you have added a second monitor to your desktop, the "Find/Replace" dialog is probably not located in the visible area. The remedy is described in the table below.

No. Procedure
1 You open the "Tools > Customize..." dialog and select the "General" tab. There you disable the
  • "Save window arrangement on closing".
2 Confirm with OK and execute the menu command "Edit > Find/Replace..." again.
3 If this dialog is still not in the visible area, close the LAD/STL/FBD editor and the SIMATIC Manager.
4 In the Control Panel you open the "Display Properties" dialog and select the "Settings" tab.
5 For the second monitor you disable the following function as shown in Fig. 01:
  • "Extend my Windows desktop onto this monitor".

Fig. 01

6 Then click the "Apply" button, followed by "OK" to confirm.
7 Restart your computer and the "Find/Replace" dialog should be visible again in the LAD/STL/FBD editor.