How do you use a GPS receiver to determine the coordinates and synchronize the system time of the S7-1200, S7-1500 and ET 200SP CPU?
The SIMATIC controllers S7-1200, S7-1500 and ET 200SP can process standard GPS frames of the RMC data type according to the NMEA-0183 standard. A GPS receiver captures the GPS frames via the RS232 interface of the communication modules CM1241 RS232, CM PtP RS232 and CM PtP.
The function blocks in the attached library provide the degrees of longitude and latitude of your current position. In addition, the current UTC time and date in the "DTL" data type format are output and the system time of the CPU is synchronized.
The PDF document gives a detailed description for STEP 7 (TIA Portal) V15 for GPS reception with S7-1200, S7-1500 and ET 200SP CPU.
Unpack the Zip file in a separate directory on your hard disk. Then you can open and edit the project with STEP 7 (TIA Portal).
- Project for TIA Portal V13 SP1 (4,2 MB)
- Project for TIA Portal V14 (1,8 MB)
- Project for TIA Portal V15 (2,3 MB)
Unpack the Zip file in a separate directory on your hard disk. Then you can open and edit the library with STEP 7 (TIA Portal).
- Library for TIA Portal V13 SP1 (1,9 MB)
- Library for TIA Portal V14 (472,7 KB)
- Library for TIA Portal V15 (1,1 MB)
You can only open and edit the library in STEP 7 (TIA Portal). Further information about opening libraries is available in Entry ID: 37364723.
Manual "CM PtP - Configurations for Point-to-Point Connections"
Download "PtP instructions for use of ET 200MP / ET 200SP in the distributed peripherals of a S7-300/400 with STEP 7 V5.5"