SINAMICS S120: PROFIBUS GSD files
This file is required to operate the drive as a node on PROFIBUS and to make the device known to the configuration tools. These configuration tools include the previous and current STEP 7 versions and COM PROFIBUS. Corresponding import functions are available in the tools.
Always use the GSD file that is appropriate for your SINAMICS Control Unit (article number).
You can find PROFINET GSD files under 49217480.
You can find PROFIBUS GSD files for the SINAMICS S150, G130/G150, GM150/GL150/SL150/SM120, DCM, DCP drive systems under 98206128.
You can find PROFIBUS certificates for SINAMICS S120 at PROFIBUS certificates SINAMICS S120.
|PROFIBUS GSD files|
|Designation||Article No.||Firmware||Appropriate GSD file|
|SINAMICS S120 CU||6SL3040-xxA00-0xxx||V2.5|
|V4.4||si2580e5.zip (20.2 KB)|
|V4.6||s120s150_v4_6_si2780e5.zip (30.1 KB)|
|V4.7||s120_v4_7_si2880e5.zip (29.7 KB)|
|V4.8||S120_V4_8_SI2980E5.zip (35.2 KB)|