What are the article numbers of the backup batteries for SIMATIC IPCs and SIMATIC Field PGs?
The backup battery of your SIMATIC IPC or SIMATIC Field PG is for maintaining basic function in the case of a power failure.
If the battery starts to run out, the diagnostics software SIMATIC IPCDiagMonitor or SIMATIC IPC DiagBase issues a diagnostics measure in good time before the battery runs out completely.
In order to restore the function of the backup battery, you must replace the used battery with a new one.
When you disconnect the device from the power supply for replacing the backup battery, you must save the current BIOS settings in the BIOS Setup under "Save User Profile". After replacing the backup battery, you restore the settings you have just saved via "Load User Profile".
You can find the backup battery required for your SIMATIC IPC or SIMATIC Field PG under "Spares on Web" at the following link:
There you enter the article number of your SIMATIC IPC or SIMATIC Field PG in the Article No.: input field and start the search for spare parts.
How to replace the backup battery, is described in the relevant device manual.
Order number, Mainboard, Motherboard, Battery, Lithium, CR2450N, CR1/2AA, Date, Lose, Forget