Siemens Industry Online Support
Siemens AG
文档类型 应用与工具 文档编号 82555461, 文档发布日期 2013年12月11日

Monitoring 24V load circuits using SITOP PSE200U with single channel message and SIMOTION CPU

  • 文档
  • 涉及产品

Using the SITOP PSE200U selectivity module with single channel message enables you to monitor up to four 24V load circuits for overload or short-circuit. The signal at the state output (S) of the SITOP PSE200U module provides you with serially coded information on the state of the individual load circuits connected to outputs OUT 1 to OUT 4 of the SITOP PSE200U selectivity module. The state of the load circuits shall be detected by a SIMOTION CPU and monitored.

The entry on hand contains a function block as well as a function description. The function block enables you to read and evaluate the signal of the status output (S) via a digital input at the SIMOTION CPU. A possible application, for example, would be indicating this information as alarm message on a panel.

The figure below shows the graphic representation of the solution.



Content of Downloads


Function block documentation
 Description of the function block for SIMOTION SCOUT V4.3.1 and SIMOTION CPUs
82555461_PSE_DIAG_Baustein_DOKU_SIMOTION_en.pdf ( 2588 KB )
ST source (ST = structured text) of the function block for SIMOTION SCOUT V4.3.1 and SIMOTION CPUs
PseDiag.zip ( 3 KB )

Last Changes
New version