SIMATIC S7-based Telecontrol via DNP3- and IEC 60870-5-Protocol
Overview of the application example
Three outstations are connected to a control center. Various products from the SIMATIC portfolio are used.
The outstations are available in 3 versions:
S7‑1500 with TIM 1531 IRC
S7‑1200 with CP 1243‑1
ET 200SP (based on S7-1500) with CP 1542SP‑1 IRC
The WinCC TeleControl software is installed at the control station, making the control station the DNP3- or IEC 60870-5-master.
The solution presented in this document offers you the following advantages:
Use of a standard DNP3- or IEC 60870-5 protocol.
Efficient and safe monitoring and control of process plants.
Homogeneous SIMATIC solution, as the SIMATIC portfolio offers software and hardware for DNP3- and IEC 60870-5-masters and outstations.
Connection to all standardized DNP3- and IEC 60870-5-master systems possible.
Addition of the IEC 60870-5 protocol