SINAMICS S120 firmware version 4.7 HF32
Concerne le/les produits(s)
|The version designation on the memory card (CF) is SINAMICS S120 V04.07.00.32|
The internal version number of the firmware is SINAMICS S120 V04.74.35.23.
When upgrading, please observe the instructions for the firmware update.
Third-party software – license conditions and copyright notes
You can find the copyright notes on the third-party software, especially Open Source Software, as well as applicable license conditions for this type of third-party software in the file READ_OSS.HTM file.
Special note for resellers
The notes and the license conditions contained in the READ_OSS.HTM file must be passed on to the purchaser in order to avoid the reseller and purchaser from violating the licensing conditions.
Availability of the source code
Some license conditions of third-party software components used in this product may oblige us to provide you with the source text and further information for these components. You can find this information either directly on the product itself or with the product (e.g. on the mass memory, DVD). Should this not be possible due to technical reasons, Siemens will gladly send you this OSS source code; however, you will have to pay the handling costs. Please contact the address specified at the end of this section in this regard:
Customer Services DF&PD
DF CS SD CCC TS
Gleiwitzer Strasse 555
90475 Nuremberg, Germany
+49 (911) 895-7222
Secondary conditions for SINAMICS S120
|sinamics_s120_v4_7_restrictions.pdf (43,1 KB)|
Function restrictions for the SINAMICS S120 for the CU320-2 and CU310-2 that have been withdrawn
Instructions to update the firmware of the SINAMICS S120 CU320-2 and CU310-2
|When upgrading, please observe the instructions for the firmware update: |
instructions_firmware_update_s120.pdf (1,2 MB)
SINAMICS S120 firmware version V4.7 HF32 for the CU320-2 and CU310-2
The following software can be downloaded:
List of faults and alarms
The "alarmlist_*.xml" are not necessary for the correct operation of the firmware and the associated STARTER. They only contain a text-based export of the "Alarm messages" of the S120 in the "xml" format (this format guarantees a correct text-based representation, independent of the wide range of fonts that exist worldwide; this means that they can be converted error-free into other formats).
GSD files for project integration into the PROFIBUS configuring tool
|The PROFIBUS GSD files are saved on the SINAMICS S120 CompactFlash card under the following path:|
However, they can also be downloaded: (see 49216293)
GSDML files for integrating projects into the PROFINET configuring tool
|The PROFINET GSDML files are saved on the SINAMICS S120 CompactFlash card under the following path:|
However, they can also be downloaded: (see 49217480)
EDS files for integrating projects into the CANopen configuring tool
|Within the scope of firmware version V4.7 the new version of STARTER V4.4 will also be made available (see 93904214).|
As an alternative to the installation of STARTER V4.4, you can also extend existing STARTER V4.3 SP2 or V4.3 SP3 installations by installing the available drive SSPs (see 26233208) for Firmware V4.7. Thus, you can use the new functions included in the Firmware V4.7 with STARTER.
|SINAMICS S120 is not supported in Startdrive V13.|
STARTER is used for commissioning.
The hardware configuration of the S120 on the TIA Portal can be implemented using GSD/GSDML files, see73257075 (manual configuring) and92022677 (configuring using STARTER script).
DCC (Drive Control Chart)