Siemens Industry Online Support
Siemens AG
  • Content
  • Search
  • Index
  • Commissioning instructions for SIMOTICS M-1PH8 Premium Performance
    • Introduction
      • Introduction
    • Notes on configuring
    • Appendix

    Entry type: Manual, Entry ID: 109482009, Entry date: 01/12/2016

    SIMOTICS Drive technology Commissioning instructions for SIMOTICS M-1PH8 Premium Performance

    Document: Commissioning instructions for SIMOTICS M-1PH8 Premium Performance (10/2014, English)
    Type of topic: Fact


    These commissioning instructions describe the manual parameterization adaptations that you have to carry out following auto commissioning.

    • Follow the explanations in these commissioning instructions. This will ensure safe, problem-free operation and maximize the service life of the motor.

    These commissioning instructions apply in conjunction with the operating instructions for the 1PH8 Premium Performance motor and the commissioning manual for the SINAMICS S120 converter.

    Siemens strives continually to improve the quality of information provided in its manuals and instructions.

    • If you find any mistakes or would like to offer suggestions about how this document could be improved, contact the Siemens Service Center.
    • Always follow the safety instructions and notices in these operating instructions.

    The warning notice system is explained on the rear of the inside front.

    Text features

    In addition to the instructions that you must observe for your own personal safety as well as to avoid material damage, you will find the following text features in these operating instructions:

    Action instructions

    Action instructions to be carried out in a fixed sequence are designated using the following symbols:

    The arrow indicates the start of the action instructions.

    The individual handling steps are numbered.

    1. Execute the action instructions in the specified order.

    The square indicates the end of the action instruction.

    Action instructions without a specified sequence are identified using bullet points:

    • Carry out the action instruction.


    • Enumerations are identified by a bullet point without any additional symbols.
      • - Enumerations at the second level are hyphenated.


    Notes are shown as follows:


    A Note is an important item of information about the product, handling of the product or the relevant section of the document. Notes provide you with help or further suggestions/ideas.

    More information

    Information on the following topics is available under the link:

    • Ordering documentation/overview of documentation
    • Additional links to download documents
    • Using documentation online (find and search in manuals/information)

    More information

    Please send any questions about the technical documentation (e.g. suggestions for improvement, corrections) to the following e-mail address:


    My Documentation Manager

    The following link provides information on how to create your own individual documentation based on Siemens content, and adapt it for your own machine documentation:



    The following link provides information on SITRAIN - training from Siemens for products, systems and automation engineering solutions:


    Technical Support

    Country-specific telephone numbers for technical support are provided on the Internet under Contact:

    Technical Support

    Internet addresses for drive technology

    Internet address for motors: http://www.siemens.com/motors

    Internet address for products: http://www.siemens.com/motioncontrol

    Internet address for SINAMICS: http://www.siemens.com/sinamics


    Support to the statistics
    With this function the IDs found are listed according to number (format .txt).

    Generate list
    Copy URL
    Display page in new design
    mySupport Cockpit