AC FEED DRIVE MOTOR,
AC feed motor, DC link 210V 145Nm, 100K, 1200rpm Forced ventilation, TG and RLG, IP64 IM B5 (IM V1, IM V3) Terminal box and signal connector Further repair locations: AV000802, AV003240
- Save filter
- Load filter
- email on update
Certificate of compliance with the order „type 2.1“ 2.1
Regardless of which application you are dealing with, whether you are doing a quick search online for help for a current machine message during operation, you want to familiarize yourself with a product, or you would like to compile your individual documentation: You will find the right current editions of the technical document. in electronic form, on data carriers, and printed.
Statement to China-RoHS directive for Low-voltage products
EU Declaration of Conformity 664.20010.03
Effective May 1, 2018, the returns identifier for SIMOTICS-S 1FT5 and 1FK6 motors was changed from R0 to S3. This means that it is possible to procure replacement motors as well as have existing motors repaired in authorized DF MC repair centers under the conditions specified. The previous recommendation to convert to the latest product series from the old and discontinued SIMOTICS-S 1FT5 and 1FK6 motors still stands!
The technical documentation for the four product families is provided online in the Siemens Industry Online Support.
SINUMERIK, SINAMICS, SIMODIRVE, SIMOVERT, MASTERDRIVES, MICROMASTER, COMBIMASTER, POSMO, SIMOTION, SIMOTICS
Summary It will not be possible to use the 1FT5 servo motors with SINAMICS drives. ...
11/1993, Operating instructions, 610.43105.02
04/1993, Operating instructions, 610.43098.02
2013, Product information
There are a number of parameters which may limit the speed or output of a drive. In this FAQ section, you will find an overview of the most important parameters and diagnostic options.
Summary The retrofiting of MC motors without brake to motors with brake is uneconomic. ...
Effective May 1, 2018, for SIMOTICS-S 1FT5 and 1FK6 the return product identifier was changed from R0 to S3. This means that under the preconditions listed below, replacement motors can be sourced and also repaired in authorized DF MC repair workshops. The recommendation to switch over from the discontinued old SIMOTICS-S 1FT5 and 1FK6 products to the current production series still applies!