POS.SWITCH MOLDED PLAST./2NO ROD ACTUAT.
POSITION SWITCH MOLDED PLASTIC DEGREE OF PROT.IP65,EN 50 041, SLOW ACTION CONTACTS 2N0, ROD ACTUATOR, ALUMINIUM ROD, 1 X M20 X 1.5
- Save filter
- Load filter
- email on update
Certificate of Design Assessment 03-HG395356-PDA
Radioactive Material in Products A0308
Type Approval Certificate ELE360217XG
This entry contains information about import EPLAN Electric P8 macros at edz-Format in EPLAN
This entry provides information on bypassing a safety function with a key-operated switch
Chinese Quality Check Mark A0210
EU-Declaration of Conformity 2371
CCC certificate 2003010305058617
This FAQ contain the statements for reduction the voltage and current depend on the sea level.
This FAQ describe which coding level according ISO 14119 can be reached by the Safety positions switches with Solenoid interlocking; the Safety positions switches with separate actuator and the non-contact safety switches.
This FAQ describe how to order the Product Catalog CA01 on DVD.
This FAQ describe the hysteresis for slow-action and snap-action contacts
QUESTION: Who is responsible for issuing certificates of origin and certificates of conformity (EN 10204-2004-2-1), test reports and factory certificates for products from Amberg (LZA)? ...
QUESTION: What Safety Integrity Level SIL is achievable with SIRIUS subsystems or subs ...
QUESTION: Can SILCL 1 in compliance with IEC 62061 be achieved with a subsystem consis ...
QUESTION: ISO 13849-1 – Application Explanations How are the PFHD values in the i...
QUESTION: Why may “non-electrotechnical components”, e.g. valves, also be calculated on the basis of IEC 62061? ...
QUESTION: Is it allowed to switch only 2 phases of a 3-phase load? ...
QUESTION: How must switching devices be protected against overload and short-circui ...
QUESTION: What pulling forces apply for round copper conductors that are connected to ...