ROD ACTUATOR FOR
twist lever for position switch 3SE51/52 Spring rod 200 mm, Form D Diameter 6 mm with terminal according to EN 50041
- Save filter
- Load filter
- email on update
This entry provides information on the diagnostic coverage level.
EAC Certificate 3032
06/2018, Configuration Manual, NEB334869902000/RS-AC/004, 3ZX1012-0SE50-1AC1
This entry provides information on the B10 values of electro-mechanical command and signaling devices, position and safety switches.
Radioactive Material in Products A0308
UR Certificate of Compliance 20130115-E44653
CoC Certificate of Compliance CoC 1885687
Certificate of Compliance CoC 165071-1885692
10/2017, Catalog, E86060-K1010-A101-A8-7600
This entry contains information about import EPLAN Electric P8 macros at edz-Format in EPLAN
To prevent access to the hazard zone of a machine during operation, a protective door is installed and the position of the protective door is monitored. Since overrunning machine components may cause hazards, the protective door is interlocked and can only be opened after the machine is in standstill.
To prevent access to the danger range of a machine, a protective door is installed. The machine can only be started, if the protective door is closed. If the protective door is opened during operation or if an error is detected, the machine will be shut down safely.
This entry contains information on the effect of wear and tear on the service life of electromechanical devices.
This entry contains information about contact resistance for 3SB1 / 3SB2 / 3SB3 / 3SE3 / 3SE5 / 3SU1 units
Chinese Quality Check Mark A0210
This FAQ contain the statements for reduction the voltage and current depend on the sea level.
DS 03, Compact Operating Instructions, 334868010000, 3ZX1012-0SE50-3CA1
This FAQ describe how to order the Product Catalog CA01 on DVD.
This FAQ describe the hysteresis for slow-action and snap-action contacts