CONTACT BLOCK FOR 3SE5250
Contact block IP20 for position switch 3SE5250 open type design 1 NO/1 NC quick action contact Short stroke
- Save filter
- Load filter
- email on update
This entry provides information on the B10 values of electro-mechanical command and signaling devices, position and safety switches.
CCC Certificate 2007010305260238
Radioactive Material in Products A0308
UR Certificate of Compliance 20130115-E44653
Certificate of Compliance CoC 165071-1885692
UL Certificate of Compliance 20130115-E44653
This entry contains information about import EPLAN Electric P8 macros at edz-Format in EPLAN
To prevent access to the hazard zone of a machine during operation, a protective door is installed and the position of the protective door is monitored. Since overrunning machine components may cause hazards, the protective door is interlocked and can only be opened after the machine is in standstill.
To prevent access to the danger range of a machine, a protective door is installed. The machine can only be started, if the protective door is closed. If the protective door is opened during operation or if an error is detected, the machine will be shut down safely.
This entry contains information on the effect of wear and tear on the service life of electromechanical devices.
This entry contains information about contact resistance for 3SB1 / 3SB2 / 3SB3 / 3SE3 / 3SE5 / 3SU1 units
Chinese Quality Check Mark A0210
This FAQ contain the statements for reduction the voltage and current depend on the sea level.
DS 02, Compact Operating Instructions, 334865530000, 3ZX1012-0SE51-1AA1
RS-AA/004, Compact Operating Instructions, 334865610000, 3ZX1012-0SE50-1AA1
11/2015, Configuration manual, NEB334869902000/RS-AB/003, 3ZX1012-0SE50-1AC1
This FAQ describe how to order the Product Catalog CA01 on DVD.
This FAQ describe the hysteresis for slow-action and snap-action contacts