×
Siemens Industry Online Support
Siemens AG
Filter criteria for entries
All Products My Products
Product tree
 
 
Clear all filters
Product
Search product
Entry type
 
Date

3TF2001-8CB4Z-X95
CONTACTOR, AC-3 30KW/400V

  • Save filter
  • Load filter
  • email on update
35
Entries
Filtered by
'
3TF2001-8CB4Z-X95
'
 
Entries per page: 20 50 100
...
1
2
...
FAQ General: Import of EPLAN Electric P8 macros at edz-Format

This entry contains information about import EPLAN Electric P8 macros at edz-Format in EPLAN

12/04/2017
ID: 48074331
(7)
FAQ Assessment of the effect of wear and tear on the service life of electromechanical devices

This entry contains information on the effect of wear and tear on the service life of electromechanical devices.

05/31/2017
ID: 109747636
(4)
FAQ How do load ratings change when contacts are connected in parallel or in series?

This FAQ content statement for contacts connected in parallel or in series.

03/14/2016
ID: 21261393
(2)
FAQ General: How to order the Product Catalog CA01

This FAQ describe how to order the Product Catalog CA01 on DVD.

07/20/2015
ID: 21656919
(3)
FAQ Number of contacts connected in series (particularly control / auxiliary current circuit) on power and auxiliary contactors

03/05/2015
ID: 109095117
(1)
FAQ Certificates of origin, certificates of conformity, test reports, factory certificates for products from the distribution center in Amberg (Lieferzentrum Amberg (LZA)).

QUESTION: Who is responsible for issuing certificates of origin and certificates of conformity (EN 10204-2004-2-1), test reports and factory certificates for products from Amberg (LZA)? ...

01/26/2015
ID: 99684616
(3)
FAQ Achievable SIL with SIRIUS subsystems or subsystem elements that have a low demand rate according to IEC 61511

QUESTION: What Safety Integrity Level SIL is achievable with SIRIUS subsystems or subs ...

08/06/2014
ID: 35444323
(1)
08/06/2014
ID: 35444144
(0)
FAQ PFHD values in the informative annex K, Table K.1 of the ISO 13849-1 standard

QUESTION: ISO 13849-1 – Application Explanations How are the PFHD values in the i...

08/05/2014
ID: 35444036
(0)
FAQ Calculation of “non-electrotechnical components” permissible on the basis of IEC 62061

QUESTION: Why may “non-electrotechnical components”, e.g. valves, also be calculated on the basis of IEC 62061? ...

05/27/2014
ID: 35444396
(0)
FAQ General: Is it mandatory to switch all phases of a 3-phase load?

QUESTION: Is it allowed to switch only 2 phases of a 3-phase load? ...

05/20/2014
ID: 21656588
(0)
FAQ Regulation for protecting switching devices against overload and short-circuits

QUESTION: How must switching devices be protected against overload and short-circui ...

05/19/2014
ID: 91198957
(0)
FAQ Pulling forces for conductors with Cage Clamp connection technology

QUESTION: What pulling forces apply for round copper conductors that are connected to ...

05/13/2014
ID: 21656695
(1)
FAQ Fuses and miniature circuit breakers for the short-circuit protection of auxiliary contacts

QUESTION: What are the consequences if the short-circuit protection of auxiliary co ...

05/08/2014
ID: 21656724
(0)
FAQ Behaviour of Low-Voltage switchgear under conditions of very low air pressure or vacuum

QUESTION: What is the behaviour of Low-Voltage switchgear under conditions of very ...

04/04/2014
ID: 21656902
(1)
FAQ General - Overview of tightening torques for terminal screws of Siemens contactors

QUESTION: Customer requires an overview of tightening torques for terminal screws of Siemens contactors. ...

01/13/2014
ID: 25711444
(0)
FAQ General: Temperature behavior of Low-Voltage Switchgear inside the control cabinet

QUESTION: What is the maximum permissible temperature on the plastic surface and connections of Low-Voltage Switchgear? ...

07/05/2013
ID: 76401003
(0)
FAQ General: Utilization categories of contactors, contactor relays and auxiliary contacts

QUESTION: Where can I find detailed information on utilization categories according IEC 60947-4-1, 3, 5-1 of contactors, contactor relays and auxiliary contacts? ...

06/18/2013
ID: 23712651
(0)
FAQ General: NOM approval mark on the Siemens Industrial Control products

QUESTION: What means the NOM marking on the Siemens industrial control products? ...

06/13/2013
ID: 24378166
(1)
FAQ General: Difference between earth fault current and earth leakage current

QUESTION: What is the difference between earth fault current and earth leakage current? ...

06/12/2013
ID: 24490178
(0)
 
Entries per page: 20 50 100
...
1
2
...