SM326, F-DI 24 X DC24V, failsafe
SIMATIC S7, Digital input SM 326, F-DI 24x24 V DC, Fail-safe digital input for SIMATIC S7 F-systems with diagnostic alarm, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole
- Save filter
- Load filter
- email on update
You will find a large number of application examples on the topic of safety in automation on the Industry Online Support pages. Through the specification of categories, the Safety Selector allows you to quickly find the suitable safety application examples in the Industry Online Support.
EC-Type Examination M6A-Certificate, TUEV/SIL , SIMATIC Safety Certificate M6A 067803 0019
10/2019, Readme, A5E32923646-AK
10/2019, Programming and Operating Manual, A5E02714440-AK
UL Certificate of Compliance, Programmable Controllers for use in Hazardous Locations, SIMATIC System S7-300 20190708-E222109
FM, Certificate of Conformity for Simatic S7-300 System & ET200M System Modules (English) FM18US0218X (2019)
IECEx Certificate of Conformity, SIMATIC S7-300 and ET200M (English) IECEx DEK 14.0042X, Issue 4
Marocco Declaration of Conformity DDC, SIMATIC Automation systems (SIMATIC HMI, ET200, S7-xx) DDC MAR / DF FA AS N09 2019-08
Power loss calculation for the right design of system cabinets
American Bureau of Shipping (ABS), Signal Modules, Fail-Safe Programmable Logic Controller and Fail-Safe, SlMATlC S7-safety related ABS 17-HG1614443-1-PDA
American Bureau of Shipping (ABS) Approval of the SIMATIC Systems S7-300/M7-300 (English) 19-HG1874537-PDA
Bureau Veritas of Shipping (BV) Approval for SIMATIC S7 safety related (English) Certificate 22045/C1 BV
Lloyds Register (LR), Fail Safe Programmable Logic Controller LR 01/20043 (E8) 2019
Validity: Products of the Operating Company DI (Digital Industries) and Business Unit SI CP (Control Products) of Siemens AG.
DNV-GL Certificate, Fail-Safe Programmable Logical Controller and Fail-Safe Signal Modules (English) TAA0000120 Rev. 2 (2019)
M6A-TUEV-Report M6A 17 05 67803 014 to SIMATIC S7 Distributed Safety (English) Report to M6A 17 05 67803 014 Rev. 3.2 (2019)
Z10-Report to TUEV-Certificate Z10 17 05 67803 015, SIMATIC Distributed Safety (English) Z10 17 05 67803 015 (2019)
When setting the IO addresses of a fail-safe ET 200M module it might happen that you get the following error message when quitting the configuration window: Object Properties (2988:2074): "The IO address: [IO initial addresses] must not exceed the maximum process image of the CPU. For the set process image and used module the maximum permissible address is [xxxx]."
Z10-Annex 1 to the Report to the Certficate Z10 17 05 67803 015, SIMATIC S7 Distributed Safety /(English) Annex1 of Report SN87345C-A1 Rev.2.10