CPU 1516F-3 PN/DP, 1,5MB Prog, 5MB Data
SIMATIC S7-1500F, CPU 1516F-3 PN/DP, Central processing unit with work memory 1.5 MB for program and 5 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, 3rd interface: PROFIBUS, 10 ns bit performance, SIMATIC Memory Card required
- Save filter
- Load filter
- email on update
V16, 11/2019, Readme, A5E46238806-AA
V16, 11/2019, Readme, A5E46238799-AA
V16, 11/2019, Programming and Operating Manual, A5E46238743-AA
This application supports in integrating the Weihenstephan Standards into SIMATIC controllers and the motion control system SIMOTION. The Weihenstephan Standards (WS) define a universal communication interface for connecting machines to higher level data acquisition systems or MES (Manufacturing Execution systems). They also define the data which must be provided for acquisition.
The Intelligent Belt application (multi belt control) can be used to pick up sequentially arriving products and to provide them grouped at an unloading position. The most important feature is that loading and unloading are independently performed.
The library "LGF (Library of general functions)" contains additional functions for STEP 7 (TIA Portal).
You can use SIMATIC S7 PLCs for preprocessing measured value data. This article provides some standard functions for statistical processing and display of measured values.
The SIMATIC S7-1200/1500 can be operated as a PROFINET-Controller. Hereby the SINAMICS G120X (PROFINET version) can be controlled by the SIMATIC as PROFINET-Device. This example shows how to do speed control with the drive controlled by the PLC.
The address synchronization error might occur when you change the addresses of the transfer areas manually.
The platform-independent OPC UA protocol with the companion specifications extension greatly facilitates standardized cross-manufacturer communication and reduces implementation effort.
UL Certificate of Compliance, Programmable Controllers for use in Hazardous Locations, SIMATIC System S7-1500/ET 200MP 20190918-E222109
Using the TIA Portal as an example, the application example describes how you can integrate the SIMATIC CFU into automation systems using the manufacturer-neutral GSDML (General Station Description Markup Language).
The "LPTO" library enables you to control up to 4 positioning axes of a S7-1200 which is assigned as an IO device to an IO controller (S7-1200 or S7-1500). IO controller and IO device communicate via I-device.
IECEx Certificate of Conformity, SIMATIC ET 200MP and S7-1500 (English) IECEx DEK 13.0010X Issue 24
Certificate Type Examination Programmable Logic Controller Systems SIMATIC ET200MP and S7-1500, Modules Type 6ES7 DEKRA 12ATEX0004 X Issue 31
FM Approvals, Hazardous (Classified) Location Electrical Equipment for SIMATIC S7-1500 & ET 200MP System (USA/Canada) (English), Issue 34 FM16US0371X & FM16CA0175X Issue 34
Sporadic, transient (approx. 1s) failures of PROFINET IO devices produce the following message in the diagnostics buffer of the IO controller:
You have the following options for connecting the PA slaves to an S7-1200 or S7-1500.
The download to the S7-1500 CPU is aborted and this error message is displayed: "The text libraries exceed <..> megabytes and cannot be downloaded to the CPU".
The synchronization modes of the SIMATIC S7-1500(T) are presented in this application example. The synchronous types of gear synchronism and cam synchronism are described in detail and illustrated by means of motion recordings.