SCALANCE S615 LAN-Router
SCALANCE S615 LAN router; for protection of devices/networks in automation technology and for protection of industrial communication by means of VPN and firewall; Further functions: address conversion (NAT/NAPT), connection to SINEMA RC, 5-port switch, 1x dig. input, 1x digital output
- Save filter
- Load filter
- email on update
In order to protect the automation network from unauthorized access, the use of a firewall is an adequate solution. This application example shows you how to use the firewall with the SCALANCE S industrial security appliance.
FM, Certificate of Conformity for SIMATIC NET 6GK5 Series FM16US0205X
An introduction to IP based remote Networks and to the related product range of Siemens. For the possible configurations of an IP based remote network there is an overview along with the requirements and the link to the configuration description.
You have to make the following settings in the Industrial Security Appliance to access the internet with a PG/PC and internet router via a SCALANCE S615 or SCALANCE SC-600.
Using the Industrial Security Appliances SCALANCE S615 and SCALANCE SC-600 you can connect networks with each other via a VPN tunnel. With additional firewall rules you can forward the data traffic to specific internal nodes only.
BV, Type Approval Certificate, SCALANCE CP / CM / S / X and W series for SIMATIC NET 11554/D0 BV
This firmware hotfix V06.01.01 can be used for SCALANCE M804PB and SCALANCE S615; it replaces the older firmware versions. You can find additional information on downloading new firmware in the configuration manual ID: 109751632
Elimination of yellow inspection stickers on SCALANCE modules
Lloyds Register of Shipping (LRS) Approval for SIMATIC NET CM, CP, SCALANCE S, X, W (IWLAN), M, Antenna 16/20067 (E1)
RCM (C-Tick), ACMA, Supplier's Declaration of Conformity Australia for Industrial Communication ABN 98 004 347 880
01/2019, Getting Started, C79000-G8976-C390-04
01/2019, Configuration Manual, C79000-G8976-C388-07
01/2019, Getting Started, C79000-G8976-C542-01
01/2019, Getting Started, C79000-G8976-C539-01
01/2019, Getting Started, C79000-G8976-C541-01
01/2019, Configuration Manual, C79000-G8976-C406-07
01/2019, Getting Started, C79000-G8976-C543-01
01/2019, Getting Started, C79000-G8976-C544-01
Declaration of Conformity EMC for Morocco for SIMATIC MV, SIMATIC RFID and SCALANCE products A5E46886796A/001
This firmware update V06.01 can be used for SCALANCE M812, M816, M826, M804PB, M874-x, M876-x and S615 products and replaces the older firmware versions. You can find additional information on downloading new firmware in the configuration manual ID: 109751632