- Save filter
- Load filter
- email on update
2015, Catalog, E86060-K5521-A131-A5-7600
The Compatibility Tool is a function provided by the Industry Online Support with which you can select compatible software products or check the compatibility of existing configurations.
In the future, SINAMICS S120 Motor Module in the chassis format and Cabinet Modules can be operated with 8 kHz. This is supported from SINAMICS Firmware Version V4.8 and higher
Siemens Large Drives Products (LD P) extends its product line of modular, liquid-cooled SINAMICS S120 Cabinet Modules (CM) low-voltage converters in the lower power range to include a standard cabinet system for industrial applications.
The holding brakes for the SIMOTICS M-1PH8 main motors in shaft heights 80 to 160 have been converted to UL-approved versions. The new holding brakes with UL approval have the same technical specifications as the previous versions, and are functionally equivalent and installation-compatible.
The numerous communication options of the S7-1500 permit the SIMATIC Energy Suite to support any measuring and automation devices for acquiring energy data. Configuration is further facilitated by the standardized procedure of the Energy Support Library for reading out energy data from the hardware of the product families SIMATIC, SENTRON, SINAMICS and SIRIUS.
This product phase-out is only announced for built-motors of the 1FE1, 1FE2 and 1PH2 product families (only EWN types). The product is scheduled to be canceled effective October 1, 2018.
As already announced in 109478106, the manufacturer NXP has discontinued the KTY84-130 temperature sensor and stopped its production.
09/2017, Product Information, A5E42806155A AA
Power loss calculation for the right design of system cabinets
Providing certain secondary conditions are met, self-ventilated SIMOTICS S servo motors can be operated at ambient temperatures up to +80 °C.
In order to make the inverter installation easier for the end users, the following changes to top plate and EMC filter plate are introduced to the SINAMICS Power Module PM240-2/PM240P-2/SINAMICS G120C FSD, E and F effective immediately.
Controlling of Safety Integrated functions of SINAMICS G120 via PROFIsafe with a SIMATIC S7-1200 F-CPU
08/2017, Hardware Installation Manual, A5E33294624B AG
For the SIMOTICS FD and SIMOTICS TN N-compact series, a comprehensive spectrum of catalog-related encoder order codes is offered.
Certain drive tasks use the Drive Control Blocks (DCB) of SINAMICS DCC to realize additional functionalities. Beside the blocks of DCB Standard libraries with additional functions based on SINAMICS DCB Extension are available.
Effective immediately, the SINAMICS G120 PM240-2 Push Through FSD to FSF for mains supply 3AC 400 V and 3AC 200VC are released for sale. The delivery release will be declared in September 2017.
Free trial versions of TIA Portal components V14 and V14 SP1 are available from this web page.
For processes involving continuous material motion, to be able to cut products into defined lengths, it is important that the cutting unit is synchronized to the material motion during cutting. The unit has to do a positioning back to the starting point after the cut. This functionality was implemented in the flying saw application.
For processes involving continuous material motion, to be able to cut products into defined lengths, it is important that the cutting unit is synchronized to the material motion during cutting. Further, between cutting operations, compensating motion must be executed between cutting steps, corresponding to the product length. This functionality was implemented in the cross-cutter application.