- Save filter
- Load filter
- email on update
Validity: Products of the Operating Company DI (Digital Industries) and Business Unit SI CP (Control Products) of Siemens AG.
Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products (SJ/T 11364-2014) RoHS China
ClassNK Shipping Certificate of Nippon Kaiji Kyokai, Fail-safe Programmable Logic Controller and Fail-safe Modules (English) 01A033 TA18539M
Bureau Veritas of Shipping (BV) Approval for SIMATIC S7-300 09048/E0 BV 2019
Today's process engineering systems are often made up of system landscapes that have grown over many years and include control systems from different manufacturers. The main challenge is to integrate various systems from different manufacturers into one operator control and monitoring system. The automation system that is responsible for the sensors and actuators is of secondary importance.
EU Declaration of Conformity, Programmable Controller SIMATIC S7-300 general (German/English) 105 / S7-300 general / A3 / 05.2019
RCM (C-Tick) Declaration of Conformity of Australia/ New Zealand, Programmable Controller SIMATIC S7-300 general (English) RCM Programmable Controller SIMATIC S7-300 general
Marocco Declaration of Conformity DDC, SIMATIC Automation systems (S7-300) DDC MAR / DF FA AS N04 2019-03
Marocco Declaration of Conformity DDC, SIMATIC Automation systems (SIMATIC HMI, ET200, S7-xx) DDC MAR / DF FA AS N09 2019-03
The data sheets and latest transport regulations for the backup batteries are available for downloading on the Internet sites of the manufacturers.
Det Norske Veritas (DNV) Shipping Approval for the ET 200 Distributed I/O System (English) TAA00001AR
Det Norske Veritas (DNV_GL) Type Approval Certificate for S7-300/M7-300 (englisch) DNV GL TA0000225
ClassNK Shipping Certificate of Nippon Kaiji Kyokai of the SIMATIC Systems S7-300/M7-300 (English) 01A028 TA18533M
After adding a CP or an FM module, the SIMATIC S7-300 CPU no longer switches to RUN mode but remains in STOP mode.
Lloyds Register EMEA, Shipping Approval of the SIMATIC Systems S7-300/M7-300 (English) 98/20056 (E11)
The SLS value is to be specified using a non-safety HMI and transferred to the drive via an F-CPU. As the connection between the HMI and the F-CPU is considered to be non-safe, data corruption could result in an unwanted SLS value being transferred to the F-CPU and then to the drive, which can cause dangerous situations.
By means of the “device proxy PLC”, you can directly access the SIMATIC controllers configured in the SIMATIC Manager and their current data such as symbols, data blocks and the alarm procedures “Alarm_S”, “Alarm_D” and “SFM”. Further on, GSDML files are available for download for the “Direct button” function.
This application example shows how to configure messages and alarms in WinCC (TIA Portal) in interaction with the S7-300/400 and S7-1200/1500 controller. Aside from the description of single messages and alarms, detailed step-by-step instructions will help you with the project configuration.