- Save filter
- Load filter
- email on update
Attached are the latest Support Packages for several TIA Portal versions ready for downloading.
Annex 1 of the Report to the Certificate Z10 067803 0020, SIMATIC Safety System (English) Annex 1 to Z10 067803 0020 Rev. 1.10
FM Approvals Certificate of Compliance, Harzardous (Classified) Location Electrical Equipment for SIMATIC ET 200SP System Modules(USA/Canada) (englisch) FM16US0053X/ FM16CA0029X
Marocco Declaration of Conformity DDC, SIMATIC Automation systems (SIMATIC S7-1500, SIMATIC Flat Panel, ET200S(P)) DDC MAR / DF FA AS N11 2019-03
M6A-Report to EC-Type Examination M6A-Certificate M6A 067803 0019 , TUEV, SIMATIC Safety System M6A Report No.SN84635C Rev. 2.2
If a substitute product is provided for a module, as soon as the last produced previous modules have been sold, incoming orders are automatically converted to the substitute product.
Report to Z10-Certificate Z10 067803 0020, Report SN 92961C Rev. 1.1. SIMATIC Safety System (STEP 7 Safety, ET200SP, ET200MP, ET200eco PN) Report zu Z10 067803 0020
IECEx Certificate of Conformity, SIMATIC ET 200SP (English) IECEx DEK 13.0011X Issue 22
Certificate Type Examination for Programmable Logic Controller Systems SIMATIC ET 200SP Module Typ 6ES7... (English) DEKRA 12ATEX0038X 26
A machine executing dangerous movements is controlled via a fail-safe controller and switched by means of contactors. The correct functioning of the contactors shall be monitored in order to ensure a high diagnostic coverage and, thus, a high SIL or PL.
Firmware update for ET 200SP F-AI 4xI (0)4..20mA HF
EU-Declaration of Conformity of Distributed I/O Devices ET 200SP-F (German/English) 203/ ET 200SP-F/ A3/ 11.2018
TUEV Z10-Certificate for SIMATIC Safety (Step 7 Safety, ET 200SP, ET200M, ET200eco PN) Certificate Z10 067803 0020 Rev. 00
08/2018, Equipment Manual, A5E41448857-AB
The introduction of the SIMATIC ET 200SP F-AI 4xI 0(4)..20mA fail-safe module expands the portfolio of currently available fail-safe ET 200SP modules. The module has been released for delivery with immediate start.
RCM (C-Tick) Declaration of Conformity of Australia/ New Zealand , SIMATIC ET 200 SP-F (German/English) RCM ET 200SP-F / A3 / 06.2018
Access to the assembly cell is to be protected with a safety light curtain. The objective is to detect in case of a violation of the detection zone (interruption of light curtain) if a workpiece is transported through the light curtain or if it was interrupted by another object.
Statement to China-RoHS directive for SIMATIC ( Panel, ITC, IPC, PG, ET200x, S7-xx, LOGO!, Cables, Network Compontents... ) China-RoHS SIMATIC all V1.5
In order to be able to safely switch of a machine even in an emergency situation, an emergency stop command device is attached and the actuators are controlled via two contactors. The safety function is designed up to PL e in accordance with EN ISO 13849-1 and SIL 3 in accordance with IEC 62061.