- Save filter
- Load filter
- email on update
IECEx Certificate of Conformity, SIMATIC ET 200MP and S7-1500 (English) IECEx DEK 13.0010X Issue 23
Certificate Type Examination Programmable Logic Controller Systems SIMATIC ET200MP and S7-1500, Modules Type 6ES7 DEKRA 12ATEX0004 X Issue 30
FM Approvals, Hazardous (Classified) Location Electrical Equipment for SIMATIC S7-1500 & ET 200MP System (USA/Canada) (English) FM16US0371X & FM16CA0175X
Power loss calculation for the right design of system cabinets
Attached are the latest Support Packages for several TIA Portal versions ready for downloading.
The IO-Link community defined device profiles to standardize the access from the user program of a controller to IO-Link devices. This library consists of blocks for standardized access using the Common and Smart Sensor profiles.
Serial communication is possible via the RS485 and RS422 interfaces with the modules below, . The terminal assignments are given in the diagrams.
RCM (C-Tick) Declaration of Conformity of Australia/ New Zealand, Programmable Controller SIMATIC S7-1500 (English) RCM Programmable Controller SIMATIC S7-1500
EU Declaration of Conformity, Programmable Controller SIMATIC S7-1500 general (German/English) 106 / S7-1500 general / A3 / 03a.2019
07/2019, Product Information, A5E39158156-AB
An 8 Port IO-Link Master module (CM 8xIO-Link; 6ES7547-1JF00-0AB0) is available for the S7-1500 / ET 200MP with immediate effect.
Marocco Declaration of Conformity DDC, SIMATIC Automation systems (SIMATIC S7-1500, SIMATIC Flat Panel, ET200S(P)) DDC MAR / DF FA AS N11 2019-03
Marocco Declaration of Conformity DDC, SIMATIC Automation systems (SIMATIC HMI, ET200, S7-xx) DDC MAR / DF FA AS N09 2019-03
PRONETA is a free tool for the analysis and configuration of PROFINET networks with special support for ET 200 distributed IO. The IO Test can provide support with the quick and comfortable examination and documentation of a plant's wiring.
A new basic version of the 8-channel analog input module for S7-1500 / ET 200MP is available effective immediately for the acquisition of current (mA), voltage (V), resistance (ohms), and temperatures (RTD).
03/2019, Equipment Manual, A5E46384784-AA
Information on the third-party software contained in the S7-1500 TM NPU module
03/2019, Equipment Manual, A5E45488510-AA
With the help of the library "LPtP" you can use the ET200 SP CM PtP or ET200 MP CM PtP with the protocols Freeport/ASCII, 3964, 3964R, Modbus RTU or USS at SIMOTION.
The cycle time of the analog input module AI 8xU/I/R/RTD/BA of the S7-1500 (6ES7531-7QF00-0AB0) is the time interval in which the module receives new values. It depends on the type and number of activated channels.