- Save filter
- Load filter
- email on update
With the Safety Integrated course offer from SITRAIN, you learn how to use the Siemens Safety Integrated products and solutions in an optimum way.
The list of available software packages (software with SIMATIC IPC) has been updated.
The new PROFIsafe Starter Kit Version V3.5.1 is available ex store and for download for registered customers. The PROFIsafe driver included in the Starter Kit has been updated to V2.2.2.
Siemens has released RUGGEDCOM products with Federal Information Processing Standards (FIPS) and Common Criteria (CC) certifications.
"Product discontinuation" is declared for the first generation of PM240 Power Modules for the SINAMICS G120 as of October 1, 2019. The PM240-2 will replace the previous series for applications up to 132 kW. Performance classes from 160 to 250 kW will continue to be available as SINAMICS G120 PM240.
Discontinuation of the KTY84-130 temperature sensor / Impact on SIMOTICS motors for Motion Control, motor spindles (Fa. Weiss) SINAMICS, SINUMERIK, SIMOTION
The I/O line SIMATIC ET 200SP HA can now be configured in STEP 7 from V5.6 onwards.
With immediate effect, a firmware version (V01.03.01) is available for the SINAMICS G120 Smart Access.
From October 1, 2019, the SINAMICS S120 Power Module PM340 blocksize will be assigned to the product cancellation phase and only be available as a spare part.
Version 4.7.4 of the RUGGEDCOM CROSSBOW software has been released and can be obtained by requesting support.
As of 08/2019, all modules of the RTU3000C line are delivered ex stock with firmware V3.1. With firmware V3.1 of the RTU3000C, the HART/RS 485 extension board also supports the HART Multidrop protocol. In addition, V3.1 releases various enhancements and improvements.
Herewith Product phase-out and product discontinuation for SIMATIC IPC BIOS Manager and SIMATIC IPC Service USB Flash Drive are announced.
RUGGEDCOM ROX-II® version 2.13.1 software is a Generally Available maintenance release of the RUGGEDCOM ROX-II® operating system and is now available for the Siemens RUGGEDCOM Products.
Effective October 1st, 2019 the SINAMICS G110 standard drives including selected options will be withdrawn from the active marketing phase and managed as a product to be phased out..
Portfolio expansion of the M12 connecting cable with the new power connecting cable with L-coding and 180° cable outlet. The power connecting cables are released for delivery and are available from stock in various lengths.
The following Industrial Ethernet switches of the SCALANCE XC-200 product line have been released for unrestricted delivery with immediate effect. The KC approval is expected to be available by the end of 2019. The marine approvals are planned.
Due to renewal of the portfolio, selected products are being declared as discontinued products.
The product SIMATIC CC712 is released for delivery and is available ex stock. Approvals for ATEX, UL, ULhasloc, FM, IECEx are not yet available but are expected by the end of September 2019 and will be made available on the Support pages.
This releases the TeleControl Server Basic (TCSB) V18.104.22.168 control station software for operation in demo mode. An appropriate license of the current software must be purchased for full use.
Description: Update 1 for SINEC NMS V1.0 has been released and is available for download