- Save filter
- Load filter
- email on update
Curated video collection on industrial communication, identification and localization.
This entry describes how to configure the "Port Mirroring" function in the Industrial Ethernet switch SCALANCE X in order to monitor data transfer at a SCALANCE X port.
In order to have the Technical Support answer a service request precisely and quickly, a description as precise as possible of the unclear issue is necessary. Below is a list of the information required by the Technical Support for inquiries about SCALANCE products.
If the Industrial Ethernet switch SCALANCE X you are using is not listed in the hardware catalog, you can add the Industrial Ethernet switch SCALANCE X to the hardware catalog via the GSDML file.
EU-Declaration of Conformity for SCALANCE X Industrial Ethernet Switches with Accessory PD-PA-CI-INC-2A1-181211
Attached are the latest Support Packages for several TIA Portal versions ready for downloading.
The "LPNDR" block library includes several function blocks. With these you can read various device and status information from a PROFINET device and describe parameters.
FM, Certificate of Conformity for SIMATIC NET 6GK5 Series FM16US0205X
BV, Type Approval Certificate, SCALANCE CP / CM / S / X and W series for SIMATIC NET 11554/D0 BV
Firmware V6.2.2 is hereby available to download for SCALANCE XR-500.
Elimination of yellow inspection stickers on SCALANCE modules
Lloyds Register of Shipping (LRS) Approval for SIMATIC NET CM, CP, SCALANCE S, X, W (IWLAN), M, Antenna 16/20067 (E1)
RCM (C-Tick), ACMA, Supplier's Declaration of Conformity Australia for Industrial Communication ABN 98 004 347 880
Declaration of Conformity Low Voltage Devices for Morocco for SIMATIC MV, SIMATIC RFID and SCALANCE products A5E46886856A/001
Declaration of Conformity EMC for Morocco for SIMATIC MV, SIMATIC RFID and SCALANCE products A5E46886796A/001
Firmware V6.2.1 is hereby available to download for SCALANCE XR-500.
DNV GL, Type Approval Certificate, SIMATIC NET MODULE TAA0000136
09/2018, Readme, A5E00364553-CC
You can use the NAT function for cross-subnet communication. This entry includes instructions for how to implement a static network address translation (NAT) with the SCALANCE XM-400 / XR-500.