- Save filter
- Load filter
- e-mail on update
01/2022, Catalog, E86060-K1010-A101-B3-7600
Attestation of Conformity M8B 038717 0081 3161
Type Approval Certificate 16/20005
Type Approval Certificate TAE00001ZM
Material Declaration "Green Passport" A0434
10/2021, Catalog, 6ZB5711-0BK30-0AA7
Task Protective doors are frequently used to fence off danger zones. These are monitored for position and, if necessary, the area from which the hazard emanates is switched off. An emergency stop command device is additionally monitored for shutting down the machine in an emergency. ...
Task Cascading of safety relays is used for tripping several safety relays in series. Multiple safety functions can then be logically connected to a shared shutdown path. At the same time, several enabling circuits can be created for selective shutdown of drive elements. ...
This entry contain an application example for Two-hand operation ....
This entry contain an application example for Emergency stop shutdown to SIL 3 or PL e ....
Task To monitor access to an open danger zone, so-called non-contact protective equipment such as a light curtain can be used. If the light beam is interrupted, a shutdown signal is triggered. ...
Task Laser scanners are frequently used to monitor entire areas for unauthorized access. These provide wide-area monitoring of a danger zone, and they trigger a shutdown signal when objects are detected. ...
Task Protective doors are frequently used to fence off danger zones. These are monitored for position and, if necessary, the area from which the hazard emanates is switched off. ...
This entry contains information about protective door monitoring by means of non-contact safety switch to SIL 3 or PL e with a safety relay
The two web-based training courses on the topic "Pathway to the safe machine" provide an overview of important aspects of machine safety.