- Save filter
- Load filter
- email on update
Morocco - Certification of Conformity M2371
This entry provides information on the diagnostic coverage level.
EAC Certificate 3032
This entry contains a list of the B10 values / failure rates of electromechanical SIRIUS products
This entry provides information on the B10 values of electro-mechanical command and signaling devices, position and safety switches.
Certificate of Design Assessment 17-HG1685293-PDA
Radioactive Material in Products A0308
Type Approval Certificate ELE360217XG
This entry contains information about import EPLAN Electric P8 macros at edz-Format in EPLAN
To prevent access to the hazard zone of a machine during operation, a protective door is installed and the position of the protective door is monitored. Since overrunning machine components may cause hazards, the protective door is interlocked and can only be opened after the machine is in standstill.
To prevent access to the danger range of a machine, a protective door is installed. The machine can only be started, if the protective door is closed. If the protective door is opened during operation or if an error is detected, the machine will be shut down safely.
This entry contains information on the effect of wear and tear on the service life of electromechanical devices.
This entry contains information about contact resistance for 3SB1 / 3SB2 / 3SB3 / 3SE3 / 3SE5 / 3SU1 units
Chinese Quality Check Mark A0210
EU-Declaration of Conformity 2371
CCC certificate 2003010305058617
This FAQ contain the statements for reduction the voltage and current depend on the sea level.
This FAQ describe which coding level according ISO 14119 can be reached by the Safety positions switches with Solenoid interlocking; the Safety positions switches with separate actuator and the non-contact safety switches.
This FAQ describe how to order the Product Catalog CA01 on DVD.
This FAQ describe the hysteresis for slow-action and snap-action contacts