- Save filter
- Load filter
- email on update
Attached are the latest Support Packages for several TIA Portal versions ready for downloading.
SIPLUS - Information for Hazardous substance restrictions identification marking (SJ/T 11364-2014) A5E38634688A-001
PRONETA is a free tool for the analysis and configuration of PROFINET networks with special support for ET 200 distributed IO. The IO Test can provide support with the quick and comfortable examination and documentation of a plant's wiring.
The operating system (firmware) of the heating control system SIPLUS HCS4x00 is updated continuously.
PRONETA is a free tool for analyzing and configuring in PROFINET networks along with support of the heating control system SIPLUS HCS4200 / HCS4300. The IO Test provides support for the examination and documentation of your plant's wiring.
Safer, more precise control of heating processes
An HCS4x00 heating control system consists of a Central Interface Module (CIM) and Power Output Modules (POMs).
Due to the different physical properties of radiators, the permitted switching capacity might be restricted depending on the type of radiator.
Depending on the Power Output Module (POM) used, the SIPLUS HCS4x00 heating control systems, in addition to the control types "Half-wave control" and "Phase Control" have three soft start variants available to control radiators with a high switch-on current (in cold state).
Line voltage compensation is only available with the SIPLUS HCS4200 if a PM4000 U/I is connected.
The SIPLUS HCS4000 IO module U/I provides the following functions:
If you observe the following effects, you can also operate the Power Output Modules of the SIPLUS HCS4200 POM 4220 Lowend, Midrange (phase control) or Flexible as single-phase.
Block library for controlling the SIPLUS HCS4x00 heating control system as PROFINET IO device or as PROFIBUS DP slave on a SIMATIC S7-1200 or S7-1500
With firmware V2.2 and higher of the CIM4210 PN you can operate the POM4220 Lowend / Midrange (Phase Control) / Flexible / Highend and POM4320 in combination with SIPLUS HCS4200.
With the SIPLUS HCS4x00 heating control system an error is signaled in the Online mode of the TIA Portal via the message "Error" in the diagnostic status of the module.
The protection by fuse is based on the configured maximum continuous load and the selected wire cross section.
Library for controlling the SIPLUS HCS4x00 heating control system as PROFINET IO device or as PROFIBUS DP slave on a SIMATIC S7-300/S7-400.
09/2018, Operating Instructions, A5E35066204A/005
04/2018, Operating Instructions, A5E35452705A/004
SIPLUS HCS - RCM EMC Supplier’s declaration of conformity for AU, NZ A5E35260605A-007