- Save filter
- Load filter
- email on update
Suppliers declaration of conformity 94-6GK1-20110610
In order to protect the automation network from unauthorized access, the use of a firewall is an adequate solution. This application example shows you how to use the firewall with the SCALANCE S industrial security appliance.
04/2017, Commissioning and Hardware Installation Manual, C79000-G8976-C266-07
FM, Certificate of Conformity for SIMATIC NET 6GK5 Series FM16US0205X
To enable a secured VPN connection you have to set up a port release on the VPN client side (connection to the internet) and port forwarding on the VPN server side (ports used in the server).
An introduction to IP based remote Networks and to the related product range of Siemens. For the possible configurations of an IP based remote network there is an overview along with the requirements and the link to the configuration description.
You have to make the following settings in the Industrial Security Appliance to access the internet with a PG/PC and internet router via a SCALANCE S615 or SCALANCE SC-600.
The control station communicates with the outstations via Ethernet using the DNP3 telecontrol protocol.
Using the Industrial Security Appliances SCALANCE S615 and SCALANCE SC-600 you can connect networks with each other via a VPN tunnel. With additional firewall rules you can forward the data traffic to specific internal nodes only.
Siemens offers the new function "Dedicated Device Access" for SINEMA Remote Connect Version V2.0 or higher (abbreviated: DDA), which allows user-specific access to unique IP addresses in the subnet. This application example shows an example of how to configure and use the "Dedicated Device Access" function.
BV, Type Approval Certificate, SCALANCE CP / CM / S / X and W series for SIMATIC NET 11554/D0 BV
This firmware hotfix V06.01.01 can be used for SCALANCE M804PB and SCALANCE S615; it replaces the older firmware versions. You can find additional information on downloading new firmware in the configuration manual ID: 109751632
Elimination of yellow inspection stickers on SCALANCE modules
Lloyds Register of Shipping (LRS) Approval for SIMATIC NET CM, CP, SCALANCE S, X, W (IWLAN), M, Antenna 16/20067 (E1)
RCM (C-Tick), ACMA, Supplier's Declaration of Conformity Australia for Industrial Communication ABN 98 004 347 880
01/2019, Getting Started, C79000-G8976-C390-04
01/2019, Configuration Manual, C79000-G8976-C388-07
01/2019, Getting Started, C79000-G8976-C542-01
01/2019, Getting Started, C79000-G8976-C539-01