- Save filter
- Load filter
- email on update
Marocco Declaration of Conformity DDC, SIMATIC Automation systems (LOGO!; Box PCs) DDC MAR / DF FA AS N06 2019-08
09/2019, System Manual, C79000-G8976-C242-10
Three ready-to-use switching programs are offered for the LOGO! 8 to control a selectively extracting filter station and a spatially extracting filter system. In addition, the third example contains a combined extraction and filter system.
American Bureau of Shipping (ABS), Programmable Logic Controller, LOGO! (English) 15-HG1409747-1-PDA
03/2019, Operating Instructions, A5E38597895 - AD
Validity: Products of the Operating Company DI (Digital Industries) and Business Unit SI CP (Control Products) of Siemens AG.
An elevating platform should be controlled with LOGO!.
In a conveyor belt system, transported goods are to be moved over four conveyor belts set up one behind the other
A building is to be supplied with a continuous supply of service water. With LOGO! 8 a pump control for a cistern is implemented.
Control of a sliding gate with LOGO! 8 via a reversing contactor
In areas where goods are to be transported ergonomics and safety play an important role. By considering these aspects your aim is to automate a rolling shutter gate and to equip it with appropriate sensors.
The energy consumption of street lights can be monitored by means of a LOGO! 8 connected to an energy meter. If the energy consumption is above or short of a certain value, a warning message is sent by the LOGO! CMR via SMS. In addition, it is possible at any time to request the current energy consumption via SMS.
A LOGO! 8 regulates the pressure of a cooling water system by means of controlling a pump. On a display all associated operating data are shown. The set value can be adjusted on the display. The water pressure and the level in the storage tank are measured with appropriate sensors.
The LOGO! 8 controller together with further LOGO! 8 controllers is used to control and monitor various functions in houses or other buildings. A smartphone can be used to monitor and control the house functions via WLAN.
Basic light circuits using LOGO! 8
You would like to monitor the filling level of a storage tank which is to be filled automatically. This application demonstrates by the following example how you can configure an automatic filling level monitoring based on LOGO!.
The lighting is controlled by LOGO! 8. This is connected to a LOGO! CMR. By selecting different operating modes, you decide whether the lighting is switched on or off at sunset or sunrise. In addition, it is possible to manually enter a switch-on or switch-off time for the lighting via SMS or locally on site.
Lloyds Register of Shipping Approval of the LOGO! logic module (English) Certificate 98/20059 (E9)
ClassNK Shipping Certificate of Nippon Kaiji Kyokai for the LOGO! logic module (English) TA18499M / 01A031
Bureau Veritas of Shipping (BV) Approval for the LOGO!, programmable logic control units (English) Certificate 07414/E0 BV