------------------------------------------------------------------------------------------
Split from Error replacing S7-300 PLC HW.

Dear oofolo,

please note, this is an english speaking forum. I assume with the french text in the screenshot you will need to find some french speaking person, or a person manually typing the text from the screenshot in a translator.

The easyiest method is copy the text directly from the message itself in a translator or change the message/language into english.

For the message:

"output address area 0 (Profibus address 34, slot 4) is already fully or partially occupied by another module"

It seems like there are outputs configured in the different profibus slaves with the same adress "0", maybe due to change of the cpu.

The address can only be used once.

For example:

Slave 34, output from address 0..2 and Slave 35, output from address 0..7.

Please check all slaves mentioned in the message and configure the output/input addresses, so they are only used once.

regards

sancurz