5/24/2024 7:21 PM | |
Joined: 1/9/2019 Last visit: 8/20/2024 Posts: 87 Rating:
|
Hello all experts. I have a project with one Simodrive MC controlled by one plc. This simodrive is connected to 1FT6082-8AF71-5TG1 motor. What is not clear for me is, the speed setpoint send to this drive from my plc (as I see in the program,picture is attached) is 57344 decimal ( or E000 hex) the programmer multiply 16384 to about 350 precent, is it possible? I mean as I know before shouldn't the maximum speed setpoint in siemens numeric be 4000hex? Or 16384 decmial? And why did the programmer do that? ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 05/27/2024 07:31:55New subject after splitting |
|
5/29/2024 1:42 AM | |
Joined: 10/17/2007 Last visit: 9/4/2024 Posts: 4012 Rating:
|
Can you please post the SIMODRIVE part number or post clean picture of drive system
|
If you like my comments please |
|
Follow us on