Hello Benedikt,

As mentioned above, we still don't have the Driver.

In our old examples we are actually using the IOT as Profinet Controller / Master. So you could e.g read/write I/Os of peripherals using Profinet I/O. 

Best Regards!

Hi, 

I try to clarify and I hope I am right.

The SIMATIC Industrial OS 1.5 contains the PN Driver (as a binary/.so on the device) and you don't need to buy a PN Driver license (6ES7195-3AA05-0XA0). You can find some more information here. 

You maybe still need the development kit I guess (6ES7195-3AA00-0YA0). This would include the documentation and all needed files. 
For the IOT2040 we provided this, but to be honest I do not know how it is for the Industrial OS. 
I will clarify this and come back to you next week.

Maybe I am completely wrong on this.

Back to the IOT2050: 
When the Industrial OS 2.0 is released for the IOT2050 I am pretty sure that the PN Driver is not included, because it doesn't yet exist for ARM architecture. I will also clarify when it will come for the IOT2050. 

Btw. the PN Driver is only a PN Controller, not a Device. And you create programs for it with C/C++. The way to use is the same as with the IOT2040 example you mentioned. 

Best regards!

 Hi, 

bergmanu

You maybe still need the development kit I guess (6ES7195-3AA00-0YA0). This would include the documentation and all needed files. 
For the IOT2040 we provided this, but to be honest I do not know how it is for the Industrial OS. 
I will clarify this and come back to you next week.

Maybe I am completely wrong on this.

I was wron on this, sorry. 

If you select the PNDriver during installation on the IPC the build environment is also installed (besides the binary of the driver). 

So you have everything you need and there is no need to purchase the development kit. 

For an example you can stick to the IOT2040 one or this one. 

Best regards!