4/10/2006 6:18 PM | |
Posts: 57 Rating:
|
I am using a TP177A, I would like to display the diagnostic buffer of the S7 CPU on the touch panel. What is the best way to display it on the panel? |
4/11/2006 10:01 AM | |
Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating:
|
Hi, The S7 diagnostics puffer, as available in ProTool, is not support in WinCC flexible. I found this info under the following Link => http://support.automation.siemens.com/WW/view/en/22449810 greetings |
4/25/2006 4:52 PM | |
Posts: 3149 Rating:
|
Hello, unfortunately there is no such list/document available..... nemo |
Follow us on