Hello,

I have a problem with the Program_Alarm function on SINUMERIK. Despite configuring the alarm properties, including the text, the alarm appears but without the text. This behavior does not match my expectations, as described in the "SINUMERIK ONE Alarm Configuration Manual" (Document ID: A5E53376656B, 01/2024).

Instead of the text I have <no text available>...

Problem details:
Goal: Display a custom alarm message configured in the Program_Alarm function on the SINUMERIK alarm screen.

Current behavior:
The alarm is triggered, but the text configured in the properties does not appear in the alarm list.

Configuration steps performed:
Configuration of the alarm via TIA Portal using the Program_Alarm instruction.
Text defined directly in the alarm properties.
The alarm ID and the associated values ​​appear correctly, but not the text message.

System details:
SINUMERIK model: SINUMERIK ONE
CNC software version: V6.21
Configuration tool: TIA Portal V18

Thank you for your help. Please do not hesitate to ask me for additional information or files if needed.

Kind regards,

Alberto MAGALHAES
OpenLogic Automation

Dear Siemens Support Team,

I would like to inform you that I have resolved the issue with theProgram_Alarmfunction on SINUMERIK. The problem was caused by the missing export of the message files. Once I exported the message files, the alarm text appeared correctly in the SINUMERIK alarm list.

Thank you for your support. I hope this helps others facing a similar issue!

Best regards,
Alberto MAGALHAES
OpenLogic Automation

there are many pdf about sinumrik