Hello,

In our system we use the CPU 1512SP F-1 PN with several safety ET200SP modules.

I am looking for a way to assign the PROFIsafe addresses to the safety modules, without the need of TIA Portal and the project file at the production site.

I looked into the method described in document "Assignment of PROFIsafe Addresses via the User Program" (doc nr.109748466). Since we are using the centralized IO configuration, this method cannot be used. Also the SIMATIC Automation Tool doesn't provide in assigning PROFIsafe addresses, as far as I can see.

Are the my findings correct? Does any of you have a suggestion if and how it is possible to assign PROFIsafe addresses in a centralized configuration, without the need of the full TIA portal sotware.

Kind Regards,

Jurgen Mulder