Hello Gentlemen

I have had really bad luck on trying to start using logo soft.

I have purchased license cd from local reseller. When installed 64 bit version freezes upon starting new project.

32 bit version runs but is unable to create any connection and shows error regarding 64 bit java. Tried to install 32 bit java but with little success.

Initially thought it was due to me using vlan to connect to other pc to read cd, as my computer doesn't have cd reader, but I have absolutely same results with demo version download from net.

Maybe there is solution to my three day struggle. 

Attached picture of the error I get from licensed install 32 bit version

32 bit version somewhat works, I can start new project, add functions, but can not connect to logo.

64 bit version freezes upon creating new project and can be stopped only via task manager.

Have you installed Logosoft V8.3 or an earlier version ? Look to the info of the program and let us know, which Logo controller you have, the order number 6ED....

For the 32 bit version you need no Windows java, there are 2 versions 32bit for Logosoft, with and without internal java.

Regards, Scorp

CD I received is 8.3

I suspect that demo version here on siemens veb page is also latest, 8.3?

Logo controller is 6ED1052-1FB08-0BA1

I had no problems with installing the 64bit version and it works fine.

If you can do everything without transfering the program to the controller, then check for same subnet of your network. A brandnew controller has normally IP 192.168.0.3 with subnet 255.255.255.0. Try also the blue icon in the transfer dialog to find the controller.

If it not works at all, then give more details of your fault messages. If you only can use a 32bit version, then check for two different versions on cdrom.

Regards, Scorp

As you also can see, the program try to open a 64bit dll on a 32bit software. I don't know, what you have installed in which order.

Try to reinstall Logosoft complete and install again. You must be admininstrator during the installation.

Regards, Scorp

I have installed 32 bit version as administrator.

64 bit version wont work at all!

Then you also have installed 64bit version before or after installing 32bit version. Without details nobody can help you. A fault message is not enough to analyse your problem.

Good luck, Scorp