Skip to Content

support.automation.siemens.com | Technical Forum | Saturday, September 6, 2025 7:35:15 PM

Print

Logo8 maths instructions

Created by: Zazu at: 11/8/2014 2:06 PM (2 Replies)

Rating (0)

Thanks 2

3 Entries

11/8/2014 2:06 PM	Rate (0)
Zazu Bronze Member Joined: 3/4/2011 Last visit: 11/1/2022 Posts: 78 Rating: (4)	Is it just me? Trying to use a counter in V8 software but there is no option to reference it in the maths function. If I write a quick prog in 7.1, save it then open it in V8 everything works but, the counter is referenced but greyed out. I am using Windows7.

Suggestion To thank Quote Answer

11/8/2014 2:59 PM	Rate (0)
190B Platinum Member Joined: 2/8/2012 Last visit: 12/22/2014 Posts: 2347 Rating: (385)	Look here.... /tf/WW/en/Posts/115536#top

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users William_B serhat_ates

11/9/2014 7:26 AM	Rate (0)
Zazu Bronze Member Joined: 3/4/2011 Last visit: 11/1/2022 Posts: 78 Rating: (4)	Thank you

Suggestion To thank Quote Answer