Dear all,

              I am having issue with p&f barrier(analog input) and analog input card.

AI=6ES71346GF000AA1

BARRIER=KCD2-STC-Ex1(p&f )

Base used=6ES71936BP000BA0(dark)

                =6ES71936BP000DA0(light)

As when I Connect 4-wire connection to (1-5)(2-6)(3-7)(4-8)  ,i am receiving analog input.(only 4-channel but my card is 8 channel)

But when i connect 4-wire connection to (1-9)(2-10)(3-11)(4-12)(5-13)(6-14)(7-15)(8-16)

then i am not able to received any input.

so please suggest solution for above.

vicky bhau

Dear all,

              I am having issue with p&f barrier(analog input) and analog input card.

AI=6ES71346GF000AA1

BARRIER=KCD2-STC-Ex1(p&f )

Base used=6ES71936BP000BA0(dark)

                =6ES71936BP000DA0(light)

As when I Connect 4-wire connection to (1-5)(2-6)(3-7)(4-8)  ,i am receiving analog input.(only 4-channel but my card is 8 channel)

But when i connect 4-wire connection to (1-9)(2-10)(3-11)(4-12)(5-13)(6-14)(7-15)(8-16)

then i am not able to received any input.

so please suggest solution for above.

 Are you sure, you have the correct base unit on the module? Can you show a diagram, how the wiring is done at the moment?

hi thank you for help problem solved by changing wiring

i am attaching old & new diagram.