Hello!

I have a S7 314 CPU (6es7314-1ag13-0ab0  v2.0) and im trying to download a FC block. I get a D280 error that the CPU compiler finds but I get no warnings when I compile offline in my project? 

Thougt that it had something to do with the timers (T90-T93) but they look the same as timers in other FC thats OK to download. 

I feel im missing something but cant figure it out, please let me know if you have any tips!

Best regards

Tobias 

Hi,

the message is also described in the .pdf from following FAQ.

What is the meaning of the error codes (xxxx:yyyy) in STEP 7?

 -> "STEP 7 V5.x Error messages (213,4 KB)" -> D280

"This message appears, if your program has a marker (example M8000.0)
which address is not supported in the CPU. Change the address and repeat
the download. If the SF LED is not still erased after download, switch the
CPU into STOP and after in RUN again."

regards

sancurz