Rating 
Thanks 1
4 Entries
| 8/15/2022 7:51 AM | |
Joined: 5/25/2021 Last visit: 12/12/2025 Posts: 1 Rating:
|
Hello all, i have a problem with pack and go loading to HMI. I created a Pack and GO file, send it to local maintenance,and they are not able to load it to the HMI. Do you have any tips, what i am doing wrong ? Tia portal 15.1 Prosave 17.0 Error message from pack and go execution you can see in attachment. thank you all AttachmentHMI.zip (174 Downloads) |
| 8/17/2022 8:42 AM | |
Joined: 5/30/2022 Last visit: 1/7/2026 Posts: 634 Rating:
|
Hi patrik1111, I recommend you to read carefully the Pack & Go documentation available at the following link, the PDF is at the end of the WEB: https://support.industry.siemens.com/cs/ww/en/view/109476153 |
Last edited by: Hazard_7 at: 08/17/2022 08:57:49If this information really helps, you could use the Rate function. |
|
| 8/29/2022 7:17 AM | |
Joined: 8/3/2009 Last visit: 1/9/2026 Posts: 16629 Rating:
|
Hello patrik1111 does the HMI stay in this start screen as shown in the screenshot all the time without booting any more? If yes then it seems that something with the software on the panel is damaged. Then you can try to make a reset to factory settings with USB: https://support.industry.siemens.com/cs/ww/en/view/109744950 Bye Murof |
|
If this Information really helps, you could use the Rate function |
|
Follow us on