Sinumerik 810D: What parameter to adjust that Z position of spindle during tool change be lower?
Created by: Allwe at: 9/15/2022 3:45 PM (1 Replies)
Rating 
Thanks 0
2 Entries
| 9/15/2022 3:45 PM | |
Joined: 2/6/2020 Last visit: 5/22/2025 Posts: 26 Rating:
|
I have the same problem with 810D z axis height. Hardinge milling machine. Tool chager had accident with spindle and after mechanical readjustment of tool changer, still missing 3mm and tool is not catch by spindle. What parameter to adjust that Z position of spindle during tool change be lower? Thank you in advance! BR, Alvydas ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 09/16/2022 06:23:45New subject after splitting |
|
| 9/16/2022 3:32 PM | |
Joined: 10/17/2007 Last visit: 1/19/2026 Posts: 4579 Rating:
|
You question is not easy to answer--we should know how OEM --Hardinger --how they made tool change configuration--search OEM service manual Before next step, can you please find NCMD30240= 1 or 4 for Z axis
|
Last edited by: nulizhang at: 09/16/2022 15:38:20If you like my comments please |
|
Follow us on