Dear experts,

I have installed ABT site V4.4 and also installed the library 05 HQ ABT Pro 4.4 SI library.  but when i open ABT pro project ,i cant find the library under Global libraries. what may be the reason

Cuhalovjan

 Hello,

I would like to extend the answer from Waedi1974 and you have to not take a components from HW catalog in ABT Pro - only if you need an integration of the KNX S-Mode device.

So any PL-Link or other HW components must be taken from a global library, acc. you system version. Do not mix different versions!

sashaadoc

 

Waedi1974

Dear sashaadoc

If you want to add a new PXC3 to a project, you have to take an instance out of the library. Don't use "Add new device" in the tree view. (see attachement)

Best regards

Waedi1974

Thank you my friend.that  was helpful.

 

 

------------------------------------------------------------------------------------------
Split from ABT Pro 4 (TIA 15) Compile error .

Ajeer_Muhammed

Dear experts,

I have installed ABT site V4.4 and also installed the library 05 HQ ABT Pro 4.4 SI library.  but when i open ABT pro project ,i cant find the library under Global libraries. what may be the reason 

Please don't post twice for the same problem.

You have also made a own topic for this problem.

ABT pro global Library not found 

Closed cause question posted twice.

The second thread with the subject ABT pro global Library not found is published within the conference Desigo™ Building Automation System.