Hello bro.

I want to made range setting time for timer on or off delay

Eample .. from 10 second to 50 second

When any one need to change parameter time not exceed time 10-50 second

Thsnk you for reply ..

I want this change time with LOGO ..

Hello ALMOHARG,

I can think of two options.

With one, the input is evaluated and the display shows whether you are outside the input window. If this is the case, the triggering of the time relay is interrupted (sample 1).

With the other option, the time is converted via inputs (e.g. logo button UP and Down). This variant can be supplemented with a "Push and Hold" (Sample 2).

In both variants, the time is entered on the time basis of the delay module (e.g. 1 minute and 30 seconds are then 90 seconds)

Kind regards Ella_68

(translated with Google)

Ella_68

With the other option, the time is converted via inputs (e.g. logo button UP and Down). This variant can be supplemented with a "Push and Hold" (Sample 2).

 @Ella: It is unfortunate that the up/down buttons is only available on the special cursor page. So it is not possible to see whereto one is setting the value.

Hello ixo65.

I think your program has a small bug. If a value is changed within the permissible range, the new value is not accepted.

Kind regards Ella_68

(translated with Google)