840D sl: Need NC parameters setting and ADI4 configuration
Created by: bipin panchal at: 2/20/2023 6:12 AM (3 Replies)
Rating 
Thanks 1
4 Entries
| 2/20/2023 6:12 AM | |
|
Posts: 10 Rating:
|
Good morning sir Your manual for 840d sl with adi is usefull, But I have some query As I have 840d sl with NCU 710.3 Having 2 ADI4 for total 7 axis one Drive cliq io card OP10, TCU, MCP, Namely X Y Z W B Atc and spindle Need NC parameters setting and ADI4 configuration I have experience with 802Dsl controller for this configuration Required help Pl guide Thanks Bipin Panchal Ahmedabad Gujarat India [snip] ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 02/20/2023 11:59:51Contact data removed. Last edited by: Jen_Moderator at: 02/20/2023 12:01:36New subject after splitting |
|
| 2/22/2023 3:21 AM | |
|
Posts: 8092 Rating:
|
Have you referred this post? Reply is there. |
| 3/11/2023 8:24 AM | |
|
Posts: 10 Rating:
|
I got solved the problem with the help of basic example Thanks Sir, |
This contribution was helpful to
|
|
Follow us on